Wiring Pigtail Adapter To Install a Tekonsha Prodigy P2 Trailer Brake Controller In 1999 Ford F-250

Question

Question:

I have a Prodigy 2 brake controller need power wire that plugs into my 1999 F250Ford super duty. I have bought from you before. I need it in a week . can you help.

asked by: Bob F

0

Expert Reply:

To install your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 on your 1999 Ford F-250 Super Duty you need the Tekonsha Plug-In Wiring Adapter # 3035-P. This will connect to the factory connector on your truck. I have linked an installation video below as the factory connector is often difficult to find on your truck.

We also have the Replacement Mounting Bracket # P7685 and Mounting Pocket # 7686 if your original bracket was left in the other truck or damaged.

expert reply by: Bud M

0

Answer 1

Hi Richard! The best brake controllers on the market for your 2023 Ford Explorer XLT are going to be from Redarc. They're super easy to use and set up, and they are very reliable. They are the ones to get. Since you said you will be towing a…

view full answer...

Answer 2

Hey Dale, both DeeMax and Hydrastar make really nice disc brake components. Either kit is going to work really well for your 2022 Grand Design Reflection 337RLS. If you want the best of the best and don't mind paying for the premium brand then go…

view full answer...

Answer 3

As you can see on the attached photo, the wiring diagram for the actuator shows there can be a 25-40 amp circuit breaker in-line with the black wiring which goes from the battery's positive terminal to power the actuator. This is actually only…

view full answer...

Answer 4

Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…

view full answer...

Answer 5

Hey Greg, Good news! There is a plug and play wiring adapter for that Prodigy P3 to simply plug into your 2000 F150. All you will need is the Tekonsha #3035-P. This will plug right into the back of the brake controller, and then connect to a plug…

view full answer...

Answer 6

In the video you're referring to of the 2015 Ram 3500 we installed the Prodigy P3, part #90195, simply because the customer wanted one. He wasn't happy with the performance of the factory integrated brake controller on his truck and he had…

view full answer...

Answer 7

Both your Tekonsha Primus IQ TK90160 and the Prodigy P3 #90195 have the same plug at the back so you'll easily be able to swap out the controllers. This will be a nice upgrade since the P3 is compatible with electric over hydraulic brake systems…

view full answer...

Answer 8

On your 2002 Ford F-250 Super Duty the factory brake controller plug will be located under the dash, near the steering column. You will be looking for a 6-prong gray rectangular plug. The location for the plug should be under the steering column…

view full answer...

Answer 9

That is the only way you'd be able to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 on your 2023 Ford Transit T350 since there is no custom fit wiring harness. To install this, you'll first need to find the cold side of the…

view full answer...

Answer 10

The Primus IQ #TK90160 doesn't have instructions that come with a wiring diagram, but we have a picture/diagram on our site that shows which wires are connected to which functions on your vehicle. I attached the diagram for you to view, the wires…

view full answer...

Answer 11

You need a brake controller that's compatible with electric over hydraulic brakes and the Primus IQ, part #TK90160, isn't. It only works with electric trailer brakes. Instead I recommend replacing the controller with the Prodigy P2, part…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Wiring Pigtail Adapter To Install a Tekonsha Prodigy P2 Trailer Brake Controller In 1999 Ford F-250

Featured Help Information

Miscellaneous Media

Continue Researching