Video Transcript for MORryde Camping Kitchen No Drill Kit for Jeep Wrangler JKU Spec Review

Hey everybody, I'm Ellen here at etrailer.com. And we're taking a quick look at the build in bracket for your Jeep. This is gonna allow you to have the trail kitchen from your ride mounted into the back of your Jeep. The nice thing about having the bracket to go with that is that you don't have to make any modifications to your Jeep. It's just gonna use the factory holes in your Jeep to allow you to build this in, and you're ready to go. So no drilling, no modifications required at all to do this.

You can, of course, go that route if you want to. But if you don't wanna have to make any changes, this is a nice way to go, pretty simple. Comes with all the hardware you need to get that installed. And it's just gonna be this bracket. It does kind of extend a little bit long.

The actual trail kitchen is just gonna sit over the top of this widest part. But since there are several holes in there, this is going to kinda spread that weight out over the frame of your vehicle. Help to make sure that it stays nice and sturdy, especially as that extends out. You're gonna be putting weight on it, probably pushing down on it as well if you're gonna be doing any chopping on the countertops and things like that. So you wanna make sure that it's super sturdy.

So this should be able to do that, no problem. As far as measurements, I'll give you a couple here. So overall, it's about 33 and a half inches long and then about 8 and 1/4 inch tall if we ignore this flat. But if we include that, it's about 9, I'd say 9 and 3/8 roughly, and then it's about an inch tall. But as I mentioned, whenever the trail kitchen is installed, it's gonna be sitting on top of this.

And then you're gonna have this kinda extra piece coming off of that. So as far as that length, you're looking at about 15 inches and then it's about an inch and a half. So that will be kinda sitting off to the side. And it will take up a little bit of the space in the back of your Jeep, kind of a bummer. But again, just to make sure that it's super sturdy and super stable, you kinda need that in there just to spread that weight out. It is made of sturdy steel. Comes with instructions on how to get this in place. It should be pretty simple to do. Eventually, we should have a video to walk you through that process as well. This is a custom fit option, and it works for the 2007 through 2017 Jeep Wrangler Unlimited. So that's gonna be the Jeep Wrangler JK. If you have the JL, we do have a specific bracket set up for that as well, but it is a bit different. So you'll have to get that one if that's what you got. That's pretty much all there is to it for our look at the build in bracket for your Jeep JK. I hope this has been helpful in deciding if this is the right piece for you. We do have a lot of Jeep accessories here at etrailer.com. So be sure to check them out, and thanks for watching..