Weld-on Trailer Frame Mounting Plate for Hopkins Engager Breakaway Kit (20099)
(5 reviews)
Price: $12.08
In Stock
Weld-on Trailer Frame Mounting Plate for Hopkins Engager Breakaway Kit (20099)
Item # HM20107
Retail:$25.85
Our Price: $12.08
You Save: 53%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
Hopkins Accessories and Parts - HM20107
- Trailer Breakaway Kit
- Mounting Hardware
- Mounting Plates
- Hopkins
This base plate is specifically designed for the Engager breakaway kit and should be mounted onto the side of the trailer frame or trailer jack - no drilling required!
Features:
- Weld-on design
- Eliminates need to drill holes in trailer frame
Specs:
- Dimensions: 7" long X 4-1/2" wide X 1" tall
- Made to fit specifically for 20099 Engager breakaway kit
Breakaway kits are a safety system to protect your trailer in the event it becomes disconnected. Hopkins designed this base plate to fit the side-mount Engager breakaway kit. Install the base mount onto the trailer frame or trailer jack - no need to drill.
20107 Hopkins Weldable Trailer Frame Mounting Plate for Side Mount Engager
Video of Weld-on Trailer Frame Mounting Plate for Hopkins Engager Breakaway Kit (20099)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Hopkins Weld On Trailer Frame Mounting Plate Engager Breakaway Kit - HM20107
Hi everybody. Andy here with etrailer.com. Let's take a brief look at this Weldon trailer frame mounting plate for your Hopkins Engager Breakaway Kit. This base plate is specifically designed for the side mount 20099 Engager Breakaway Kit and it should be mounted onto the side of the trailer frame or trailer jack rather. And there is no drilling required. Now breakaway kits, as you no doubt know are a safety system to protect your trailer.
In the event that becomes disconnected and this is a weld-on design eliminating that need to drill holes into your trailer frame. Lemme go ahead and retrieve my ruler here and just give you some overall dimensions. So beginning with the overall length as you can see we are sitting right at seven inches long, and then the overall width, we are sitting right at four and a half inches wide. And then removing this nut real quick, I wanted to give you the overall height. We are sitting right at an inch tall and it does include this hardware that I have loosely mounted here.
And that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Reviews
Weld-on Trailer Frame Mounting Plate for Hopkins Engager Breakaway Kit (20099) - HM20107
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
This base plate is specifically designed for the Engager breakaway kit and should be mounted onto the side of the trailer frame or trailer jack - no drilling required!by: Richard03/21/2017
Works Great no more broken ears on mounting battery box
by: David S03/21/2012
Excellent communication, very knowledgeable, and extremly fast shipping. I bought the plate, the lid and the box for my engager after my son stepped on it getting the trailer packed and broke the box. I wanted a better holding device than just screwed onto the trailer.
by: Greg05/05/2016
Fit battery box well, easy to weld on the trailer, works as designed!
by: Keith C.01/10/2014
The palte fix the battery box perfectly.
by: B Guy03/28/2019
Just what I needed
5
5
See what our Experts say about this Hopkins Accessories and Parts
- Recommended Mounting Bracket for Hopkins Engager Breakaway Kit to Trailer JackIf you wanted to mount the Engager Breakaway Kit part # 20099 to your jack on your trailer the recommended method is to use the weld on bracket part # HM20107. This will get welded to the jack or trailer frame and then with the included hardware you would secure the battery box to it. I would only use the trailer jack as an install point if your trailer has a non-swiveling jack that has square tubing.
view full answer... - Where is the Best Place to Install Engager Trailer Breakaway KitThe Engager Trailer BreakAway Kit # 20400 can be mounted to either a trailer's frame or jack. The recommended method is to use the weld on bracket part # HM20107. It does not come with U-bolts but it does have holes in the mounting brackets to allow it to be attached. No mounting hardware is included so you'll need to get that separately.
view full answer... - Best Breakaway Kit for a 2003 Dutchmen 24QB-SSL CamperAny one of our breakaway kits would work great for your 2003 Dutchmen 24QB-SSL Camper. Of the linked selection, I recommend going with the Hopkins Engager Push-To-Test Trailer Breakaway Kit # 20099. This comes with, as the title suggests, a button that you can push to test the status of the battery. It comes with a built-in battery charger and a battery box for protection. To complete the installation you do need butt connectors like part # DW05744-5. If you wanted to mount the kit to...
view full answer... - Installation of Hopkins Engager Breakaway KitInstalling the Hopkins Engager Push-To-Test Trailer Breakaway Kit # 20099 is a pretty easy process; I've linked the installation instructions for you and the diagram I added is from those instructions. First you need to mount it on a flat surface on your trailer; if you can't find one I recommend using the Weld-on Trailer Frame Mounting Plate for Hopkins Engager Breakaway Kit # HM20107. After that you will wire one of the wires from the breakaway switch to the trailer brake wire for the...
view full answer...
- Availability of Weld-On Trailer Frame Mounting Plate for Bright Way Breakaway KitThe Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 typically requires drilling into the trailer frame in order to install it. Unfortunately, this breakaway system does not have a weld-on trailer frame mounting plate option. For a breakaway kit that does have a weld-on mounting plate, take a look at the Hopkins # 20099. This kit is the same side load design and has the push-to-test with a built in charger. It also gives you the option to lock the lid with a pad lock like the #...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Wilson B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard G.
3/21/2018
still works great have not had any trouble since I purchased the plate over a year ago