Lock N Roll 3-Position Adjustable Channel Bracket - Weld On - 11,000 lbs

Video Transcript for What to Know About the Lock N Roll 3-Position Adjustable Channel Bracket

Speaker 1: Today we're taking a look at a three position adjustable channel bracket. This adjustable height channel bracket is designed for lock and roll couplers, but can be used for other channel bracket couplers and accessories as well. It's designed to accept items that are made or designed for three inch wide brackets. And we can tell that by taking a measurement inside edge to inside edge. We can see there that that measures about 3 to 3 1/16 inches. So you would take your accessory, you'd place it inside the bracket, and then you can move it up or down making sure that the mount holes line up with the mount holes on the bracket.

And then you'd secure it in place with the appropriate hardware.This channel bracket allows you to adjust your coupler's height to match different vehicle heights. Four mounting holes on each side offers a three position mount, so position one, position two, and position three. It is a weld on installation. It's a nice sturdy steel construction.Measuring top to bottom. It measures about ...

we're going to call it about 7 1/2 to 7 5/8 inches tall. The adjustment holes are separated on center by 2 inches, and they will accept 5/8 inch diameter bolts. Hardware not included. Maximum gross trailer weight capacity is 11,000 pounds. Maximum ton weight capacity is 1,100 pounds.

Product is made in the USA, and covered with a limited lifetime warranty. That's going to do it for today's look at the three position adjustable channel bracket.