How Does the Demco Replacement Hub Part # DM04369 Replace/Install

Question

Question:

the best way to change demco hub and spindle 5 bolt on 115m-04369

asked by: Harold P

1

Helpful Expert Reply:

The hub part # DM04369 that you referenced basically just bolts to a flange on the spindle of the Kar Kaddy.

Basically you would remove the 4 bolts that hold the old one on and then use them to reinstall this to it.

expert reply by: Jameson C

1

Answer 1

To bleed the brake lines with your Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout #DM8750311 you'll need to complete the following steps: 1. First raise the tongue of the trailer 4" to 6". 2. Loosen or remove two 5/16”…

view full answer...

Answer 2

Demco doesn't have a big list out there of what tires work with the 3-Point Standard Wheel Tie-Down Strap #DM03528 (because that would be huge) but they do have a calculator that can be used to determine what size you need for your tire size. If…

view full answer...

Answer 3

For your Demco Kar Kaddy, the Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs #DM62VR will work great. The Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs #K2R35D will not work…

view full answer...

Answer 4

I do have a wiring harness you can use, but we do not carry a wiring harness specifically for the Kar Kaddy SS #DM9713045. I recommend using instead the Hopkins #HM48240. This will be the same "wishbone" style harness that you have now, so…

view full answer...

Answer 5

The Replacement Hub Assembly for Demco Kar Kaddy #DM04369 is the only hub assembly we have for the Kar Kaddy's. There is no 5 on 4 bolt pattern, you likely already have a 5 on 4-1/2 bolt pattern. I recommend double checking the measurements. I…

view full answer...

Answer 6

They come in separate parts as opposed to a single kit, but we do indeed have brakes for your Demco Kar Kaddy SS tow dolly, with the following parts: - Replacement 10" Brake Rotor #DM03927-92 - Replacement Brake Caliper Assembly #DM13825-92 -…

view full answer...

Answer 7

Michael, to add brakes to your Demco Kar Kaddy 3, you can use the Kodiak Disc Brake Kit #K2R35D. This will allow you to slide the rotor over the existing idler hub, and the brackets for the caliper will bolt to the brake mounting flange. You will…

view full answer...

Answer 8

Thank you for reaching out! Yes, the Replacement 10" Brake Rotor #DM03927-92 will fit your trailer and then for a brake caliper you need the Brake Caliper Assembly #DM13825-92. When I confirmed this with my contact at Demco he informed me that…

view full answer...

Answer 9

It all has to do with the axle. The Demco Kar Kaddy SS item #DM9713045 has a steerable axle and the Demco Kar Kaddy X item #DM9713093 has a swivel platform. Both help with tracking behind your motorhome, however the steerable axle will be far…

view full answer...

Answer 10

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

view full answer...

Answer 11

More than likely the DeeMaxx Disc Brake Kit #DE42FR will fit your 2021 Coyote trailer. You will need to verify that your existing brakes use slip-on rotors and your current bolt pattern is 5 on 4-1/2. If that is accurate then these will work for…

view full answer...

Answer 12

Narrower tires and rims will certainly help you pick up some side clearance for fitting your boat trailer into your garage. A wheel with positive offset will also help by shifting the wheel's center closer to the trailer frame. Since you have…

view full answer...

How Does the Demco Replacement Hub Part # DM04369 Replace/Install

Product Page this Question was Asked From

Continue Researching