Replaces 1 adhesive velcro strip for your Access tonneau cover. 16' Long x 1-1/4" wide.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 16 foot long Replacement Adhesive Velcro Strip for the Access Tonneau Covers. This part will replace the adhesive Velcro strip for your Access tonneau covers. It installs along the bedrail of your tonneau cover. This part includes everything laid out here on the table. The one adhesive strip, the four pop rivets, two alcohol pads and a nice set of detailed instructions.Again the length on this is 16 feet with on the hook section is one and one quarter inches wide. Basically when you go to install this what you'll do is drill out the existing rivets on each end of your existing rails, peel off the old hook tape and glue and then clean the area with these alcohol pads that they include.
Apply this new hook tape. Just lay it down, peel that off to stick to it and then install the new rivets at each end of the rails and you're all ready to go.That should do it for the review on the 16 foot long replacement adhesive Velcro strip for the Access tonneau covers.
Average Customer Rating: 4.7 out of 5 stars (43 Customer Reviews)
Replaces 1 adhesive velcro strip for your Access tonneau cover. 16' Long x 1-1/4" wide.Made sure my rail was very clean it stuck on very good. Hope it stays
Great product works well, Great people to work with. Will definitely buy from them again!!
Worked fine for like a month and then started to peel up I had to use rivets every 6 inches so it would kinda work. I probably wouldn’t buy it again.
This product did exactly what I needed. The velcro on my Lund truck bed cover was in need of replacement, and this fit perfectly. At first I tried to remove the old glue, but after failing at that, using brake cleaner made the old glue tacky enough that combined with the adhesive on the new tape, it adhered quite well. Its been holding well for about 8 months so far.
Great Replacement Part Thanks !!!
Looks like a good product and should do a good job holding my cover.
The velcro strip that slides into the rails on my Tacoma bed for my soft top fit perfectly and the price was right. Only took a few minutes to install. I've always had good experiences with etrailer and would highly recommend them.
We ordered replacement velcro for our access tonneau cover. The velcro came it was a perfect fit easy to put on easy to follow the instructions. Looks like Factory work very pleased with the product and very pleased with the fast shipping. Will be looking to see what other things I can order to keep my truck looking new.
Just what I needed for my tonneau cover . Glad I found etrailer the other site I found the product to be two dollars higher and their shipping was 16.00 . etrailer had a lower product price and less expensive shipping.
Haven't yet installed the product, but happy that you had the correct width & length hook & loop tape replacement to fit/secure our tonneau cover. Thank you!
Due to weather conditions, delivery took a little bit longer than projected, but otherwise was exactly what I expected.
I just finished installing the velcro strips this afternoon.
Installation instruction was good and it went on easily.
Great product, better than OEM it replaces. Sonic shipping. Easy ordering. Will definitely order from Etrailer again!!
I think everything went well
Shipping was quick and the product arrived as shown. I ordered the wrong type of Velcro for my cover but was able to use it — didn’t have time for an exchange because of travel plans! Thanks for such good service!
Product was exactly what I was looking for. Shipping time was excellent,would recommend this co. to anyone Thank You
Excellant service, right product. Hard to tell which product i needed and the material i got is very cheap. Hook and loop. I bought the hook part. Not very defined and holds but not great.
Perfect replacement for my worn velcro.
Great product easy to install. Shipping was also 3 days sooner than expected
Product was delivered early and exactly what I needed. Did not disappoint and worked perfectly on my cover.
Thank You
just put in on so i've not had much time using it. It went on great was easy to install, looks like it will really stand up but time will tell. I have tried other product and this one loks and acts better then all the others.
so far so good. alcohol wipes that came with the product were dried up but otherwise the new velcro was easy to install.
The Velcro strip went on the way it should. It looks great. The alcohol sheets were dry, so I used my own.
Was Easy to install and has worked as well as the factory one!
Excellent product so far. Arrived on time and was easy to install. I’m hoping it lasts a very long time
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.