See what our Experts say about this Putco Vehicle Lights

• Recommended Tailgate Light Bar For A 2013 Ram 1500
  I'm not quite sure how your camera is blocking you from installing a 60" tailgate light bar, but we do have some solutions from Putco that plug into the back side of the factory 7-way using the Replacement Quick Connect Wiring Harness for Putco Blade or Red Blade Tailgate Lights # P529004. You could then plug the light bar into the 4-pole connector on one of their light bars (listed below) for a super easy installation. Separate 18" lights # P57CR (this one comes with the # P529004...
  view full answer...
• Can Putco Red Blade LED Tailgate Light Bar P92010-60 Install on Monaco Dynasty RV
  The Putco Red Blade LED Tailgate Light Bar # P92010-60 that you referenced could install at the rear of a 1997 Monaco Dynasty RV. It would be just a matter of tapping into the trailer taillight circuits to power the light bar instead of a vehicle's taillight wiring.
  view full answer...
  
• Light Bar For 2017 Ford F-150
  Hi Carey; thanks for the purchases from us, and due to the F-150's wiring issues, the only light bar we have that will work with the F-150 is from Putco, as it is designed to work with that truck. What you need is the Putco Red Blade LED Tailgate Light Bar # P92010-60.
  view full answer...
• How to Disengage Backup Alarm on Ford F150
  Hello Jack. I am not sure the year of your Ford F150 but I do have a couple of options for you to get that alarm off while you are driving. First option would be to disengage the alarm. You can do so by turning the truck on, putting it in reverse, and then press the "Select/Reset" stem on the center dash controls. Hold it down for a couple of seconds, then release it. Second option is to install a light bar like Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 60"...
  view full answer...
• Does Putco Lightbar part # P92010-60 Work on 2025 Chevy Silverado with Blindspot Warning
  Hey Peter, the Putco light bar part # P92010-60 that you reference does not affect the blind spot warning system of your 2025 Chevy Silverado 2500HD so you wouldn't need to worry about that. This would plug right into your 4-way and would not require any additional hardwiring.
  view full answer...
• Troubleshooting A Putco Light Bar That Isn't Lighting Up
  I would start by checking your power source for the Putco Red Blade LED Tailgate Light Bar # P92010-60 as well as the inline fuse for it. There should be a fuse holder on the light bar's wiring that you can check and then I would test the truck's connector with a tester # PTW2993 with each light function to see if a fuse blew on the truck and is no longer sending power back to the light bar.
  view full answer...
• Troubleshooting Putco Red Blade LED Light Bar on 2020 Chevy 3500
  The Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 60" Long # P92010-60 product page has alternative directions for the newer Chevy trucks. It shows the function and even wire color and location. Function ----- Truck Wire Color Blade Wire Color: Left Turn Signal ----- Green wire on driver’s side plug (Figure 2) Yellow Right Turn Signal ----- Green wire on passenger’s side plug Green Running Lights ----- Brown wire on driver’s...
  view full answer...
• Troubleshooting Taillight Error Messages After Install of LED Taillight Lightbar
  The light bar # P92010-60 doesn't have quite enough of an amperage draw to convince your truck's wiring that a trailer is connected but it can sense some additional draw so it essentially is confused. What you can do is use load resistors like part # DI34ZR installed on the left and right turn/stop circuits to simulate the additional load to get rid of the error messages.
  view full answer...
• Troubleshooting A Non-Working Right Turn Signal With A Putco Red Blade LED Tailgate Light Bar
  If only the right turn signal isn't working on your Putco Red Blade LED Tailgate Light Bar # P92010-60 then you likely either have a loose connection or the fuse for your trailer right turn signal isn't blown. I recommend checking the fuse first since this is the easiest/quickest fix. From what I can find this should be fuse F81, but I recommend checking your owner's manual to ensure you're looking at the correct fuse. From there you'll need to check your connections from the light to...
  view full answer...
• Will Putco Red Blade LED Tailgate Light Bar - Direct Fit Work On a 2022 Ford F-150 with Smart Hitch
  I do have an option for you but I checked with Putco and the Putco Red Blade LED Tailgate Light Bar - Direct Fit part # P49CR isn't a fit for a 2022 Ford F-150 with the Onboard Scale/Smart Hitch. Instead, you'll need to go with the Putco Red Blade LED Tailgate Light Bar part # P92010-60 which plugs into the trailer connector. Please note, this may trigger a trailer message on the dash and in which case you'd need to either add resistors inline on the light bar harness or remove the connector...
  view full answer...
• How to Install a Tailgate Light Bar on a Trailer Using the Vehicles 4-Way
  The Putco Red Blade LED Tailgate Combination Light Bar part # P92010-60 which is the lightbar I recommend for your trailer has LED lights so the amp draw will be very minimal. The reason that this is important is because the total amp draw for each circuit on both the trailer and light bar cannot exceed that of the vehicle's trailer lighting circuits. I do not believe you will have any issues because the light bar has LED lights which draw much less power when compared to incandescent....
  view full answer...
• Troubleshooting A Putco LED Tailgate Light Bar That Won't Signal On The Right Side
  The Putco Red Blade LED Tailgate Light Bar # P92010-60 only connects via a 4-pole connector so what's most likely happened is the poles inside the connector have corroded. I recommend first checking the 4-pole for your Silverado with a probe tester # PTW2993 to ensure that you're actually getting a right turn signal at the 4-pole. If not then you'll need to trace that wire back to the source to find the issue. If you're getting the signal then you can reconnect the light to your truck's...
  view full answer...
  
• How Can I Stop Receiving Light Out Message when Using LED Light Strip on My 2021 Ford F-250?
  When installing a tailgate light strip like the Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 60" Long # P92010-60 on your 2021 Ford F-250, it sounds like you are getting an error message because the F-250 thinks there is a trailer plugged in when there isn't. The best bet is to use the 7-Way to 5-Way/4-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs # C35FR. Since this adapter has resisters built-in, it will eliminate the tendency...
  view full answer...
• Troubleshooting Taillight Not wokring With Putco Red Blade LED Taillight Light
  The only other thing you could check for is a blown fuse. You'll want to consult your owner's manual for the fuse location. If the fuse is fine, then you may just have a faulty product and would just need to replace it. If you used the provided quick splice connectors you could also try wiggling the wire around to get a better contact with the copper.
  view full answer...
• Recommended LED Tailgate Lightbar For 2020 Ford F-150 with BLIS
  There is one tailgate LED light bar confirmed to work with your 2020 Ford F-150 Super Crew with BLIS(Blind Spot Information System) and the other factory options, which is the Putco Red Blade LED Tailgate Light Bar # P92010-60. Putco has a 100% guarantee that it will work with the 2015+ F-150s and 2017+ Super Duty trucks. With that said, there is not a custom harness to install the # P92010-60 at this time, as it will need to be installed using the included quick splices to not interfere...
  view full answer...
• Putco LED Light Bar That Will Work With 2018 Ford F-250
  There is one light bar from Putco that will work for your 2018 Ford F-250, the Putco Red Blade LED Tailgate Combination Light Bar # P92010-60 which simply plugs into your 4-way. Putco has stated that this system has a new driver which will eliminate any type of code coming on from the tow package, back-up assist or blind spot detection system. They have guaranteed this light bar to work with 2017 and up model year Ford Super Duty trucks (as well as 2015 and up F-150's). I have added...
  view full answer...
• LED Light Bar Recommendation to Work on 2023 Ford F-150 with BLIS System
  I recommend using the Putco Red Blade LED Tailgate Light Bar # P92010-60 for your 2023 Ford F-150, and then instead of using the included quick-splices you can use the Replacement Quick Connect Wiring Harness # P529004 which tees in behind the 7-Way on your truck and gives you a simple 4-Way flat connector to get power to the light bar without digging into the OEM wiring on your truck. Putco has confirmed this is compatible with the BLIS system on your vehicle so you're good to go!
  view full answer...
• How To Install Putco Red Blade LED Tailgate Light Bar On 2021 Chevy/GMC Without Splicing
  I do have an option for you but there are no custom plug-in harnesses for a 2021 GMC Sierra 1500 at this time. That said, you can still install the Putco Red Blade LED Tailgate Light Bar part # P92010-60 without splicing and retaining the trailer connector by using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384.
  view full answer...
• How To Add a 4-Way to a 2019 GMC Sierra 3500 To Use with Tailgate Light Bar
  In order to add a 4-way trailer connector while also retaining the 7-way trailer connector on a 2019 GMC Sierra 3500 you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 which offers plug-n-play installation. This will then allow you to plug in a tailgate light bar like the Putco Red Blade LED Tailgate Light Bar part # P92010-60 and still tow a trailer if needed.
  view full answer...
• Can I Use the Putco Red Blade LED Tailgate Light Bar on a 2016 Chevy Silverado 1500
  As long as your 2016 Chevy Silverado 1500 has a 4 way connector available at the rear of your vehicle, the Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 60" Long # P92010-60 will work just fine. This LED light is powered by the 4 way plug that would normally be used to power the lights on a trailer. If your vehicle only came equipped with a factory 7 way plug, I recommend using the Curt # C55774 which will plug into the US car connector port at the rear of your vehicle...
  view full answer...
• Difference Between 60 Inch Putco LED Tailgate Light Bars
  The difference between the two is that one is compatible with Ford trucks that have BLIS (blind spot information system), Lane Keeping system, or Trailer Tow packages, and the other is not. - Compatible With Ford Trucks: Putco Red Blade LED Tailgate Light Bar # P92010-60 - Not Compatible With Ford Trucks: Putco Red Blade LED Tailgate Light Bar # P92009-60 The # P92010-60 is compatible with Fords because those trucks have a different electronic system, so Putco designed this logic box...
  view full answer...
• Troubleshooting the Putco Red Blade LED Tailgate Light Bar item # P92010-60
  I recommend checking all of the wiring connections on the Putco Red Blade LED Tailgate Light Bar item # P92010-60. You will want to make sure nothing has been frayed or corroded. I would pay particular attention to the ground wire. If the wiring isn't the issue then the control module has most likely gone out and is unfortunately not something that can be fixed and would require replacement of the light.
  view full answer...
• Will Putco Red Blade LED Tailgate Light Bar Fit 2020 Chevy Silverado 2500 LTZ
  The Putco Red Blade LED Tailgate Light Bar # P92010-60 will fit your 2020 Chevy Silverado 2500 LTZ, and the harnesses are going to be the same between a Silverado and Sierra. This light bar even has instructions that are specific to a Silverado LTZ, which I have linked for you. I have also linked a video review for you to take a look at.
  view full answer...
• Will Putco Red Blade LED Tailgate Light # P92010-60 Work on 2020 GMC Sierra 2500
  Yes, the Putco Red Blade LED Tailgate Combination Light # P92010-60 that you referenced will fit and work great on your new 2020 GMC Sierra 2500. This is indeed the new/current model of their Light Bar and it does feature an upgraded design that was specifically engineered so that it doesn't interfere with or trigger error codes with regards to existing towing packages. I have attached a short video review that you can check out as well.
  view full answer...

Do you have a question about this Vehicle Light?