Are Replacement Hubs Available for a Harbor Freight Trailer
Question:
I have a harbor freight trailer. What hubs do I need. It has 4 hole 12 inch wheels. Its a 4 x 8 heavy duty folding model. Thanks
asked by: Marc P
Expert Reply:
Harbor Freight trailers do not typically use standard hubs or spindles. In most of the situations that we have encountered, we do not carry a hub that uses the same bearings and seal that Harbor Freight uses. The best way to determine if we have a hub that will fit your trailer would be to find the bearing and grease seal part numbers and search for a hub that uses the same bearings and seal. I have attached a photo that shows where the part numbers are located.
If you do not have the bearings or they are too hard to see, you can also measure the bearing and seal journals on the spindle. The photo I attached also shows where to measure on a spindle. With these measurement we can determine if any of our hubs will fit. We strongly recommend using a precise measuring tool such as a dial caliper because these measurement must be exact to the thousandths of an inch.
If you can send me these part numbers or measurements, I would be happy to search our products for you.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Search Results: trailer hub bearing
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Do Harbor Freight Trailers with 5 Bolt Pattern Use Standard 5 Bolt Pattern
- Q&A: What Size Bearing Buddies Will Fit a Harbor Freight Trailer 94564
- Video: Hands-On with the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles
- Video: Kinedyne Wheel Net Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Kinedyne Wheel Net - 14" to 15" Diameter Tires - 2" Wide - 2,500 lbs - Qty 1
- Shop: Kinedyne Wheel Net - 16" and 16-1/2" Diameter Tires - 2" Wide - 2,500 lbs - Qty 1
- Video: Feature Review Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: The Low-Down on the BT8 Spindle for 2,000-lb Trailer Axles
- Video: Measuring To Choose The Right Trailer Axle
- Article: Most Popular Wheel Bearings
- Search Results: metric trailer hubs
- Q&A: Selecting Replacement 4-on-4 Hubs for Tag Along Trailer
- Q&A: Replacement Trailer Hub with 7/8 inch Outer Bearing on a Boat Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: 12 Inch Wheel & Tire For Trailer With Higher Speed Rating
- Q&A: Availability of a Replacement Castle Nut for a Harbor Freight Trailer
- Search Results: jack stand
- Search Results: jack blocks
- Search Results: jack stands
- Search Results: harbor freight trailer
- Search Results: castle nut
- Article: Trailer Wiring Diagrams
on Trailer Hubs and Drums
