Do Harbor Freight Trailers with 5 Bolt Pattern Use Standard 5 Bolt Pattern
Published 08/29/2019
Question:
are the 5 bolt hubs and wheels on the Harbor Freight 4x8 trailers... standard sizes or are they a smaller custom size?
asked by: Darren R
0
Expert Reply:
The experiences we've had with Harbor Freight trailers is that they use standard 5 bolt patterns common on other trailers. The most common being 5 on 4-1/2 inches like what the part # AKIHUB-545-2-1K which fits the common 2,000 lb axle spindle.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How To Find Bearing Replacement For Harbor Freight Trailer
- Q&A: How Often Should Bearings Be Greased And How Much Grease Should I Add?
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub Recommendation for Tracker Boat Trailer with Spindles that Measure 1.05 inch
- Q&A: Reverse Lights for 2018 Ranger Bass Boat Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Q&A: Replacement For TDE LP75 Disc Brake Actuator
- Article: Spring Towing Readiness Checklist
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Determine Tire/Wheel Diameter
- Article: Trailer Tire Sizing