Replacement Hub for 2016 Tracker Trailstar Trailer with 2,700 lb Axles
Question:
Trying to find the exact hub assembly for my 2016 Tracker Trailstar trailer VIN4tm11fh10gb002586 PT175 2700lb. Thank you!
asked by: Mitchell C
0
Expert Reply:
Hey Mitchell, the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles part # CE13311 is correct for Tracker trailer with 2,700 lb axles. It uses L44649 bearings and has a 5 on 4-1/2" bolt pattern in case you wanted to verify that as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Spec Review
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Hub Replacement Recommendation for 1990 Shorelandr Boat Trailer B148/1610
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: Replacement Axle That Measures 46-1/2 Inches From Center to Center
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Best Boat Trailer Jacks
Mitchell
10/21/2024
Jameson, I recently ordered #CE13311 based off your advice above but once I received the hub and went to install it, it looks like the CE13311 is not meant for my trailer. Once I had the old hub off I was able to verify the bearings as L44649 & L68149. What do I need to do in order to return the hub that you recommended and replace it for the correct hub? Thank you