Replacement For 125255UC Grease Seal

Question

Question:

Hi. I’m needing a double lip wheel seal for a small Hustler boat trailer. The number on this seal is 125255UC. Do you guys carry this seal? Thanks, Brad

asked by: Brad

0

Expert Reply:

Hey there Brad,

We do have a replacement for the 125255UC grease seal; the correct seal is the following:

- Double Lip Grease Seal # 34823

expert reply by: Kyle S

0

Brad Z.

4/30/2024

Thank you Kyle! I’ll get them on order.

Reply

Answer 1

Your Kendon fold-up trailer has a 2K axle, given the 1.063 diameter spindle you referenced. Assuming you have idler hubs, you'd need #8-91-05UC1-EZ for a 4 on 4 bolt pattern or #AKIHUB-545-2-LF-2K for a 5 on 4-1/2 inch bolt pattern. The L44649…

view full answer...

Answer 2

The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.

view full answer...

Answer 3

I've actually answered a similar question on this before and found: In my research I found that the grease seal you are looking for could have an inner diameter of either 2.24 or 2.12 inches and an outer diameter of 3.37 inches when measured with…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hello John, thanks for reaching out. Since your bed is shorter that 8' we do recommend using a sliding 5th wheel hitch for extra clearance on tight turns. So for your 2020 Chevy 2500 I recommend the following: - B&W Patriot 5th Wheel Trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey Marc, When it comes to anti-sway bars the thicker the better they'll perform so you'll want measure the thickness of your current bars and swap them out accordingly. The thickest options we offer for your 2024 GMC Sierra 3500 are the…

view full answer...

Answer 10

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is indeed compatible with air bags when installed on your 2024 GMC Sierra 3500. This is the right bar for your stock height truck. I would stay away from the Air Lift air…

view full answer...

Replacement For 125255UC Grease Seal

Product Page this Question was Asked From

Continue Researching