Replacement Hub and Bearing Kit For a Carry On Trailer With Dexter 8-259 Idler Hubs
Question:
I have a 10+ year old Carry On 5x8 mesh floor trailer from Tractor Supply. I need to replace one of the wheel hubs/bearings. The old hub is a Dexter 8-259 per the markings on the hub itself. What are my choices for a replacement hub assembly bearings and all. Thanks!
asked by: Dan
Expert Reply:
It sounds like you are looking for the Dexter 8-259 # 8-259-5UC1 hub. If you only need the internals it will use the Bearing Kit # BK1-150 for each hub. The bearing kit includes new bearings, races and a grease seal for 1 hub. I recommend filling the bearings with the Grease # L11390 when you install them.
Products Referenced in This Question
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: for 2000 lbs axles trailer hubs and drums
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: RV Bearing
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Q&A: Replacement For A Dexter Axle 8-259 Trailer Hub Assembly
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: A Closer Look at the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Q&A: Replacement Bearing Kit For a Dexter 8-259 Idler Hub
- Search Results: dexter 8 259
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: 13 inch 5 lug
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Dexter Hubs that are Marked 8-259
- Q&A: Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility Trailer
- Video: What to Know About the Grease Seal
- Video: All About the Grease Seal
- Q&A: Should There Be A Gap Between The Seal and The Inner Bearing In My Hub
- Q&A: Replacement Bearing Kit For Small Travel Trailer
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer hubs and drums
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer jack
on Trailer Hubs and Drums
