Troubleshooting Broken Landing Gears On A 2021 Genesis Supreme Vortex 5th Wheel

Question:

I have a 2021 Genesis 30. IKS toy Haller and my landing gear has gone out. I ordered the lippard kit and it is the wrong inside diameter on the gear set. The one I have is bigger. And instead of a circlip I have a Spring clip that goes around the small gear over the roll pin to hold the assembly together. I can not find a model or part number or manufacturer on the leg anywhere.

asked by: Brock

Expert Reply:

If you're unable to find a model number on your current landing gears then you only have two options; contact the manufacturer of the trailer to see if they have the part number or replace the entire landing gear set. If you're going to replace the landing gears then you'll want to measure the weld stops to find a match so that you don't have to cut off the hangers and weld on new ones.

I've attached a diagram of the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 to give you it's dimensions incase this is a fit. If not let me know what measurements you get from the bottom of upper weld stop to top of lower weld stop and from the top of upper weld stop to bottom of lower weld stop.

expert reply by: Kevin C