Correct Hopkins Custom Tail Light Wiring Kit for Towed Vehicles for 2013 Ford Focus Hatchback/Sedan

Question

Question:

I wanted to make sure that this wiring kit will work on my 2013 Ford focus hatchback

asked by: Dan

0

Expert Reply:

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56007 is for a 2013 Ford Focus Sedan. The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56008 is for a 2013 Ford Focus Hatchback.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello Jeffrey, Happy to confirm these parts for you. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #RM-524430-4 is going to be a great fit for your 2013 Ford Focus just as long as you do not have the ST model. Your Roadmaster…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Will! You can flat tow your 2014 Jeep Wrangler Willys with a Dana 44 axle as long as you have a two-speed transfer case. Make sure to check your owner's manual to verify this information. Does it have the standard bumper on the front?…

view full answer...

Answer 8

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

view full answer...

Answer 9

Hey Jean, the only hitches we offer for your 2023 Subaru WRX are ones that hang below the rear bumper like the Draw Tite part #76271. The EcoHitch you mentioned only fits older models of the WRX. What are you wanting to use the hitch for?

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…

view full answer...

Answer 12

Hey Mark, I can definitely get you the rest of your flat towing components for the Gladiator. It looks like you have the Roadmaster Falcon All-Terrain Tow Bar #RM-522 so you'll want the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. This…

view full answer...

Correct Hopkins Custom Tail Light Wiring Kit for Towed Vehicles for 2013 Ford Focus Hatchback/Sedan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching