Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
Products Featured in This Question
Question:
I have an axle with Fayette Dayton 9254 w-5 Max dia. 12.040 in markings. I need both sides brake assembly. Can you help?
asked by: Fabrian K
Expert Reply:
To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit # TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit # AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting Hardware Kit # BRKH12 to complete your installation.
According to my research the Fayette Dayton axles are older and some obsolete so I also recommend comparing the brake mounting flange bolt pattern in the attached photo for our brake assemblies to what you have on your axle to verify these match up.
Attached is a review video for you to reference.
(click to enlarge)
Product Page this Question was Asked From
TruRyde Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand Assemblies - 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Bolts And Nuts Needed To Mount 12" Brake Assemblies
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand Assemblies - 7K
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Video: 7-Way Molded Trailer Wire Connector, 6' Long: The Breakdown
- Video: Comprehensive Review: Deka Wire
- Video: A Closer Look at the Deka Wire
- Article: Trailer Wiring Diagrams
- Q&A: What Length Wiring Harness Is Needed For a Boat Trailer Measuring 22-1/2' From Tail Light To Tongue?
- Q&A: How is Length of 7-Way Connector Lead Determined for Wiring Up Trailer
- Search Results: trailer wiring
- Search Results: wiring
- Search Results: 7 way trailer connector
- Search Results: trailer connector
- Search Results: 7 pin blade connector
- Search Results: 6 way trailer connector
- Q&A: Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly
- Search Results: brkh12
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Shop: 12 Gauge 7 Conductor Jacketed Wire - Per Foot
- Shop: Brightway ICU Trailer Breakaway Kit w/ Charger, LED Tester, and 5 Ah Battery - Side Load
- Video: In-Depth Review of the Trailer Hub and Drum Assembly
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Q&A: Determining Correct Replacement Trailer Brakes For Trailer with 3 Axle Tube
- Q&A: 5200 lb Axle Brake Assembly Torque Specs
- Q&A: Grease Seal for Dayton Fayette 9254 B w/ LM67048/25580 Bearings
- Video: Feature Breakdown: TruRyde Electric Trailer Brakes
- Video: Hands-On with the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange