Cost Effective Alternative to Trailer Valet XL Trailer Dolly with Chain Drive

Question

Question:

I need something small and cheap I can pull my small trailer with mowing stuff to houses.

asked by: Rykor

0

Expert Reply:

If you like the Trailer Valet XL Trailer Dolly with Chain Drive part # TVXL2 but it's out of your budget then you may be interested in Trailer Valet 5X Swivel Jack and Trailer Mover part # STC-V211 which is a jack and dolly combo but has a smaller capacity at only 5,000 lbs. If it's a super light trailer then the Rack'Em Trailer Dolly part # RA20 works good as well. The Trailer Valet XL and Trailer Valet 5X both have chain drive systems so they won't take as much effort to move.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 7

Hey Brian, The Goodyear Endurance ST205/75R14 Radial Tire w/ 14" Liger Aluminum Wheel #LH55VR does not come balanced (none of our 205/75-14 combos come balanced...or the vast majority of the other combos for that matter), but you can either have…

view full answer...

Answer 8

The crank handle of the Trailer Valet XL Trailer Dolly #TVXL25 can be spun in either direction so it could push or pull a trailer if needed. In either direction it works just as good.

view full answer...

Answer 9

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball #TVXL25 actually has a 10,000 lb trailer weight capacity and 1,000 lb tongue weight capacity. It is very likely that your 20 foot travel trailer will have a weight that is…

view full answer...

Answer 10

To convert your Trailer Valet XL part #TVXL25 to a 2 inch ball you would need the part #TVBB2 which will allow you to easily replace the base with a new ball that is 2 inches. You would be able to easily go back to the larger ball size as well. The…

view full answer...

Answer 11

Yes, you can switch from the 2-5/16" hitch ball to a 2" hitch ball with the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs #TVXL25. All you will need is the 2" Hitch Ball w/ Base for Trailer…

view full answer...

Answer 12

The Trailer Valet Trailer Dolly part #STC-V211 does not come with the drill attachment. You'd need to order that separately with the part #TVDA.

view full answer...

Cost Effective Alternative to Trailer Valet XL Trailer Dolly with Chain Drive

Product Page this Question was Asked From

Continue Researching