Correct Advent Air Replacement AC Unit for Coleman AC on Winnebago

Question

Question:

Hi, I need to replace my original rooftop Colman 9203C876 air-conditioner on my 2006 Winnebago. Will this fit and is it plug and play? Do I need any additional wiring connectors? It says it has a capacitor start so am I assuming correctly that it doesnt need an accessory one? The current A/C is wired to a thermostat on the wall and has no heat strip. Thanks

asked by: Charles P

0

Expert Reply:

The Advent Air RV Air Conditioner - 15,000 Btu - White # ACM150 is the base model so you will need a different part number if you're wanting that start capacitor and the wiring adapter. For your setup you need part # ACCOL150 instead.

If you want to add a heat strip to the mix then you also need part # ACMHD.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Answer 1

I have some measurements for you which will allow you to verify if the Replacement Amber Lens #A44AB will fit your 2023 Grand Design Imagine XLS 17MKE. This lens is 4" long by 1-1/2" tall, see image below. Unfortunately, only Grand Design…

view full answer...

Answer 2

The RV products 8335 is a rebranded Coleman Air Conditioner Model 8335896. I suggest replacing it with the Advent Air RV Air Conditioner, #ACM135B. This option is compatible with Coleman Mach setups if used with Coleman Mach Adapter Wiring Kit for…

view full answer...

Answer 3

Hey Daniel, yes the Advent Air AC Unit part #ADV86SR that you referenced can replace your current Dometic Brisk B59516 that you have now. This is very similar to the Brisk and Duo Therm units so it can replace them and use the same wiring and…

view full answer...

Answer 4

Hey Matt, we have what you need but the part #ACM150 only comes with the top portion of the system so it would not be correct. You'd instead want the part #ADV32SR if you have a ductless system or the part #ADV92SR if you have a ducted system and…

view full answer...

Answer 5

Hey José, thanks for reaching out! The air distribution box and thermostat that works with the Advent Air RV Air Conditioner #ADV86SR you're looking at is part #ADV98SR for a wall thermostat, or part #ADV48SR if you want the thermostat built…

view full answer...

Answer 6

Hello Robert, thanks for reaching out. The best option for this will be to replace your rooftop AC, controller and distribution box. Do you prefer a wall thermostat, or a distribution box with manual controls on the ceiling? We have options for both,…

view full answer...

Answer 7

Hello again, Mike. The best way to resolve this is to simply replace your distribution box at the same time as your AC unit. The distribution boxes are not terribly expensive, and that way you would be able to plug the AC right in without any cutting…

view full answer...

Answer 8

Hello Grant, The Advent #ADV92SR, when it comes with the wall-mounted thermostat, does in fact function like a true thermostat not just a fancy manual remote. That means it will automatically turn the air conditioner on and off to maintain the…

view full answer...

Answer 9

Hello Richard, thanks for reaching out. You are correct the Advent AC Units like part #ACM150 are generally not going to be compatible with the Duo-Therm AC systems. Especially since your current unit is so old. Your best option will be to replace…

view full answer...

Answer 10

Hello Eddie, thanks for reaching out. Adding a 15K Advent AC unit to your Jayco travel trailer is possible, but it will be best to replace the entire AC system. So what I recommend is the Advent Air RV Air Conditioner System #ADV92SR. This comes with…

view full answer...

Answer 11

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams for…

view full answer...

Correct Advent Air Replacement AC Unit for Coleman AC on Winnebago

Featured Help Information

Miscellaneous Media

Continue Researching