Recommended Storage Cover for 20' V-Nose Trailer

Question

Question:

Do you have a storage cover that will fit. 20’ V nose enclosed trailer ?

asked by: Denny T

0

Expert Reply:

I recommend the The Adco Aquashed, # 290-52272 for a 20 foot trailer with a V-nose. This has adjustment straps in the front to tighten it to the V-nose. The side panels are made of a non-abrasive, triple-layer polypropylene to help the storage cover breath and eliminate moisture build-up.

expert reply by: Michael R

0

Answer 1

There is one option we carry which has both the length and width needed to cover your 20' long and 8-1/2' wide enclosed trailer, the Classic Accessories PolyPro III Deluxe Travel Trailer Cover #052963732634. This cover is designed for…

view full answer...

Answer 2

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 3

I have a solution for you, but from what I was able to determine, the Rockwood 2109s is 22'-4" long, so the #290-52240 is going to be just a tad too short. Instead, the SFS AquaShed #290-52272 would be the correct size cover for your trailer…

view full answer...

Answer 4

Hey Shawn, So the length you mentioned should include the tongue, and since a cover doesn't go over the tongue you'll subtract three feet from that for a 22'5" measurement. That said, there are a pair of options for covers that fit:…

view full answer...

Answer 5

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

view full answer...

Answer 6

Hey Allan, thanks for reaching out! You can definitely use a higher rated converter, like the 60A Progressive Dynamics #PD79RR, to charge your batteries. The time when we talk about making sure everything matches is when everything is OEM and people…

view full answer...

Answer 7

Hey Michael, You're correct that it lets you see what charge mode the converter charger is in, but it also has a button on it to let you manually change the charge mode as needed. There isn't currently Bluetooth or other app capabilities at…

view full answer...

Answer 8

Hey Joe, yes the correct replacement motor you need is the part #FVK8017-00.

view full answer...

Answer 9

If you are wanting to go to higher capacity leaf springs I would advise against it. The problem is that since the trailer axle is rated for 3,500 pounds you won't gain any additional capacity by switching to higher capacity springs. What it will…

view full answer...

Answer 10

Hello Todd. Yes, there is a 1-7/8" ball available for the Weigh Safe Hitch w/ Built-In Scale #WS88RR. For that, you can use the following: Replacement 1-7/8" Hitch Ball for Weigh Safe Ball Mounts - Stainless Steel - 7,500 lbs #WS66KR Leave…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Storage Cover for 20' V-Nose Trailer

Product Page this Question was Asked From

Continue Researching