Replacement Dexter D52 Trailer Axle with 86.5" Hub Face Length
Updated 05/04/2026 | Published 02/07/2022 >
Products Featured in This Question
Question:
I am looking for a replacement axle Dexter D52 Part number: 3231287. It has a HF or 86.5 and SC of 68.5. Do you have a comparable axle? Thanks.
asked by: Craig
Expert Reply:
It sounds like you're looking for the Dexter Trailer Axle Beam part # 8327816 which is 86.5" long at the hub face and has a 5,200 lb weight capacity. The spring seats however will need to be moved in for your application which requires tack welding so bear this in mind, you'll likely want part # TRSS300 to go with as removing the old ones cleanly is difficult. If you're looking to save some cash we do have this same axle through our in-house brand as part # e45GR.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: 6000 lbs axle trailer bearings races seals caps
- Search Results: correct track
- Q&A: Recommended Dexter Axle w/a 6,000 lbs Capacity and a 86-1/2" Hub Face
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Shop: Replacement Trailer Hub Bearing - 25580
- Q&A: Grease Seal For A 5736575 6,000lb Dexter Axle
- Q&A: How To Determine Which Grease Seal Fits Dexter 6,000lb Axle
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Q&A: Replacement for 5,100 Pound 86-1/2 Inch Long Overslung Dexter Axle
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles Spec Review
- Search Results: trailer hubs and drums
- Q&A: Why Would Trailer Brakes Only Work With Manual Override Lever and Not Brake Pedal
- Q&A: Troubleshooting Weak Trailer Brakes That Won't Lock Up with Override Lever of Controller Slid
- Search Results: 008~201~05
- Search Results: 25580
- Search Results: 010~054~00
- Search Results: 031~032~02
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Video: Let’s Check Out the Dexter Trailer Hub and Drum Assembly
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Q&A: Bearing Kit & Seal For Dexter 031-030-02, 031-032-02 Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers


Vw
5/2/2026
Do you have a drop axle in that width?