How to Measure for Trailer Hitch Drop and Recommended Ball Mount

Question

Question:

Please advise how to choose the correct Tow and Stow Ball Mount to pull a 25 foot Minnie Winnebago Trailer 2022 with a Ford Truck 2021 F150 Power Boost with Sport Package 4 x 4. Thank you in advance for the help.

asked by: Benjamin K

0

Expert Reply:

You will first need to identify the rise/drop that is needed for your particular arrangement of the 2021 Ford F-150 and the 2022 Winnebago TT. For safe and comfortable towing, your trailer should always be as level as possible. A level trailer handles well, promotes even tire wear, and minimizes strain on both the trailer and tow vehicle. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then with your Winnebago trailer, measure from the ground to the bottom of the coupler with it also placed in a level position, find the difference. This value is your drop/rise. Please note the linked article on How to Measure for Trailer Hitch Drop for further details.

I like the B&W Tow & Stow 2-Ball Mount, # BWTS10040B and if this fits within your drop/rise measurement is what I suggest. This is a Class IV rating, Drop is 7 Inches with a 7 Inch rise. Has both the 2 inch all and the 2-5/16 inch ball.

However, I think you would be better served, when towing your 2022 Winnebago 25' Travel trailer, with a Weight Distribution System with Sway Control. I suggest you consider the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control, # EQ37100ET. This more evenly distributes the weight over axle of your F-150 and the Winnebago TT. This provides for greater stability and control creating a more level ride for both tow vehicle and trailer. The spring bars flex appropriately over uneven terrain for a controlled, even ride without the bounce. This is for a tongue weight of between 600 lbs. and 1,000 lbs. with a maximum gross towing weight of 10,000 lbs. It has a 2-5/16" ball and is for a 2" X 2" receiver. The maximum rise is 7" from top of hitch receiver opening and a maximum drop of 3" from top of hitch receiver opening.

Please note the linked product review and installation videos below along with the a help article on How to Measure for Trailer Hitch Drop.

expert reply by: Michael R

0

Answer 1

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 2

The B and W Tow N Stow ball mount part #BWTS10048B would be a great option for you. It's adjustable in height, comes with all three popular hitch ball sizes and has a 10k capacity which would be way more than you'd need.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How to Measure for Trailer Hitch Drop and Recommended Ball Mount

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching