Does The Demco Hijacker Autoslide Feature Work In Reverse

Question

Question:

Will the sliding mechanism work while backing up also?

asked by: Dylan

0

Expert Reply:

Yes, the autoslide function of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550022 will work in both forward and reverse, which will make backing into tight spots a breeze.

expert reply by: Kevin C

0

Answer 1

I recommend the Demco Hijacker 18K Autoslide 5th Wheel Trailer Hitch w/ Slider part #DM8550034 with the custom rails part #DM8552011-71 for the 2015 GMC Sierra 2500 short bed. The Hijacker is designed so you don't have to get out of the truck to…

view full answer...

Answer 2

The brackets and hardware are not available as separate purchases, so you would need to get the full kit, which is the Underbed Rail and Installation Kit for Demco Hijacker UMS 5th Wheel and Gooseneck Trailer Hitches #DM8551010. I have added a link…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hello John, thanks for reaching out. Since your bed is shorter that 8' we do recommend using a sliding 5th wheel hitch for extra clearance on tight turns. So for your 2020 Chevy 2500 I recommend the following: - B&W Patriot 5th Wheel Trailer…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 10

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 11

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Answer 12

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Does The Demco Hijacker Autoslide Feature Work In Reverse

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching