Can I Use the Quick Splice Connectors to Install a New Wishbone 4-Flat Trailer Harness

Question

Question:

Can I use your quick splices with the W002230 to my trailer lights. If so, what size item # should I use?

asked by: Randy

0

Expert Reply:

Yes. There's no reason you can't use something like the Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1 # SWC502905-1 to install the # W002230 on your trailer. The # W002230 uses 18 gauge wiring, so the # SWC502905-1 would be the recommended quick splices assuming that your trailer also uses 14, 16 or 18 gauge wiring.

I've also linked all of our quick splice connectors to this answer in case you find that you need something sized differently.

expert reply by: Erik B

0

Answer 1

Hey Jason, Really good questions and we can definitely address them. The tow package on your 2018 Ford Edge only gives the 4-way and there isn't a different option for the 7-way. So because you already have the 4-way with the tow package, the…

view full answer...

Answer 2

You will need to start with a 4-way (if you do not have one). For that you would want the #118669. I attached an install video that shows this installed in a very similar 2016 Ford Edge as yours. Now if your trailer does not have brakes all you would…

view full answer...

Answer 3

You will need to start with a 4-way (if you do not have one). For that you would want the #118677. So the easiest to install brake controller that also works really well is the Curt Echo Mobile part #C51180. Basically this just plugs into an active…

view full answer...

Answer 4

You are correct, the Curt T-Connector Vehicle Wiring Harness #C56272 is not a fit for a 2019 Ford Edge; this harness is only a fit for 2015-2018 Ford Edge SE and SEL models; whoever told you it did fit your vehicle was mistaken. We carry the correct…

view full answer...

Answer 5

There isn't a quick-install brake controller port on a 2018 Ford Edge Titanium with a tow package for installing a brake controller. In fact the only brake controller we offer that can fit the versions of the 2018 Ford Edge Titanium with the tow…

view full answer...

Answer 6

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 7

Yes, you can jump the front axles brake output circuit to power the rear axle. Check out the picture I attached to see how most people do this.

view full answer...

Answer 8

The gauge of the wiring in the 4-way kit part #A35W42B is 18 gauge.

view full answer...

Answer 9

Mobile home axle components are considered one time use and are mainly all non-standard parts which means that if you attempt to replace anything on them you find that nothing fits or matches. If you went with a new spindle like the part #TRU37FR…

view full answer...

Answer 10

Yes, the number 42 spindle is the standard for Dexter 7k axles like what you have. For that we have the part #TRU57FR which does not have a brake flange or we have the part #TRU37FR which does have the brake flange.

view full answer...

Answer 11

Trailer spindles should only be installed by a qualified fabricator with trailer axle experience who has the necessary equipment to square up a trailer spindle. It's not a project for someone who's pretty good at welding since if the spindle…

view full answer...

Answer 12

If you take a look at the provided photo, you can see the important dimensions of the #TRU37FR spindle.

view full answer...

Can I Use the Quick Splice Connectors to Install a New Wishbone 4-Flat Trailer Harness

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching