Who Can Replace Trailer Axle Spindle
Question:
How do I install the spindle. do they have to be welded on the axle.
asked by: Les W
0
Expert Reply:
Trailer spindles should only be installed by a qualified fabricator with trailer axle experience who has the necessary equipment to square up a trailer spindle. It's not a project for someone who's pretty good at welding since if the spindle is off by just a little bit you will have all sorts of alignment issues.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Search Results: boat trailer wiring kit
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Video: All About the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles
- Search Results: fender marker lights
- Search Results: brake wire
- Search Results: 12 gauge wire
- Video: What to Know About the Trailer Axle w/ Electric Brakes
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 6,000 lbs
- Q&A: Do Hangers Need to be Exact Match to Use APT6SE Kit
- Search Results: trailer bearings
- Search Results: trailer wiring kit
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 5,200 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement Spindle for Axle with 25580 and LM67048 Bearing
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Q&A: Recommended 8,000 lb Slipper Spring Hanger and Equalizer Kit for 2 Inch Springs
- Video: Detailed Breakdown of the 35 Ft 4-Way Trailer Wiring Harness
- Video: All About the Grease Seal
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Review
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Can I Use the Quick Splice Connectors to Install a New Wishbone 4-Flat Trailer Harness
- Q&A: Gauge of Wiring in 35 Ft 4-Way Trailer Wiring Harness # A35W42B
- Q&A: How to Wire Second Axle of Trailer for Brakes
- Video: Trailer Axle with Idler Hubs Spec Review
- Search Results: trailer jack
- Shop: Trailer Hitch
Explore Expert Info
![Our Expert]()
on Trailer Spindles
on Trailer Spindles
