Replacement Breakaway Switch, Cable and Pin For Tap By Hoppy Switch

Question

Question:

Hi, the plastic loop in my pin broke in my breakaway switch when I attempted to pull it out by the cable to test the brakes. The cover plate on the switch says Tap by Hoppyinch with two blue wires exiting out the side. It is held in place by one screw through a metal plate on the side. Do you sell just the cable/pin for this breakaway switch. If so, name and part# please. Thank you!

asked by: John

0

Expert Reply:

I'm going to have to recommend replacing the entire breakaway switch as I cannot locate any replacement parts for your Tap by Hoppy switch.

I recommend the Tekonsha Trailer Breakaway Switch # 420000 for a replacement. The wiring is long enough to run to the factory connectors so you do not have to worry about splicing wires where they are going to be exposed to the elements. It also connects with a single screw and uses a 49" long cable and pin.

expert reply by: Bud M

0

Customer Image
(click to enlarge)

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

If you still have the plunger end that goes in the break away switch, then you can simply insert the plunger back into the switch and that should cut off the power to the brakes on your trailer. If you no longer have the plunger, then you can either…

view full answer...

Answer 3

The Optronics 7 Inch Round Transit Stop and Tail Light #ST90RB referenced in your question includes one light assembly. They are not available in a set, so you will just need to order two. This is a really nice, round tail light that measures 7-1/8…

view full answer...

Answer 4

Thank you for providing the photo of the 7-inch combination Stop/Turn/Tail/License Plate Combo Cake Light from your 1968 Pathfinder travel trailer. I was able to find photos and some comments on trailer owner forums regarding your 1968 Pathfinder…

view full answer...

Answer 5

That definitely sounds like a ground issue. If your wires are hot and you are getting signals to the lights in front of them then you need to check your grounds. Not only do you have a main ground wire but each light itself will have a ground. Check…

view full answer...

Answer 6

I can help you wire the Replacement Tekonsha Trailer Breakaway Switch #420000 and the accompanying diagram shows exactly how it will be wired; I have also added a link to a video which shows it being installed. The white wire is a ground wire and the…

view full answer...

Answer 7

The pin that keeps the contacts inside a break away switch is plastic or otherwise a material that does not conduct electricity. As long as the contacts on the inside are not rusted the switch will continue to work. There is a way you can test it and…

view full answer...

Answer 8

Hi Keith; you could replace the battery with the #HM20008 but I would go ahead and replace the entire thing with #20099. If you replace the whole kit you're getting the battery and a usable battery connection plus you don't have to worry…

view full answer...

Answer 9

I am glad to hear this light will work for your vintage camper. Since there are many ways these lights can be mounted it would be really difficult to include the mounting hardware. I recommend checking out the hardware you have that your current…

view full answer...

Answer 10

Optronics tail light #ST90RB is unique in that it is designed as a brake light and tail light whereas most trailer lights are brake/turn and taillights. But it can function as a brake/turn/taillight when the red wire is connected to the combined…

view full answer...

Answer 11

I can honestly say I have never had someone building a railroad crossbuck sign ask me a question! But, yes, the Optronics light #ST90RB will illuminate steady when connected to a 12 volt power source, like a battery, provided that the power source…

view full answer...

Answer 12

The Optronics Transit Light part #ST90RB is a multi function light designed to work with the stop/turn signals and running light signals. If you had a pair on each side and wanted the outside lights to be the stop/turn and the inside to be running…

view full answer...

Replacement Breakaway Switch, Cable and Pin For Tap By Hoppy Switch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching