Replacement Puck Light Lens

Question

Question:

Broke a lens for our puck light and would like a couple extra for backups.. model # on light is L9100 also 202981 on the fixture... the lens is some pretty thick glass not plastic... any help

asked by: Mike

0

Expert Reply:

While we do not carry the L9100 light you are asking about, or replacement parts for it, we do have similar replacement options such as the 2" Recessed Halogen Puck Light with Frosted Glass, # 277-000125 and the LED RV Puck Light - Recessed Mount - Frosted Glass Lens, # CE29FR.

expert reply by: Michael R

0

Answer 1

I looked up your Sharp Carousel and it measures 23.5 x 22.8 x 15.1 inches overall so for a replacement the easiest to fit in your opening would be the Greysone Standard part #324-000106 which measures 23-3/8 inches wide by 15 inches tall and 13-1/2…

view full answer...

Answer 2

The overall dimension you are measuring is the length of the outer tube of the jack. If you check out the first picture I attached you'll see where the part #LG-1 measures 29-1/2 inches in length. The second picture I attached shows the…

view full answer...

Answer 3

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

view full answer...

Answer 4

The Trailer Clearance or Side Marker Light #MC32AB may fit your 2016 Heartland if the mounting hole dimensions are the same. This light has 3" center to center mounting hole dimensions and a 1/4" mounting hole diameter. I've added links…

view full answer...

Answer 5

From what I could find on the Dexter 072-042-00 leaf spring, it appears to be the standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated up to 1,750 pounds (per spring). With that said, the 4-Leaf Double-Eye Spring for…

view full answer...

Answer 6

The The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has 7 branch circuits rated at 30 amps. Progressive Dynamics recommends the following brands of breakers for the #PD4060K: Thomas & Betts – TB…

view full answer...

Answer 7

Hello James. I can definitely point you in the right direction, but the SAE number is not actually a part number, so this is not a good way to look up a specific light. The light in your picture looks very similar to the Optronics LED Side Marker…

view full answer...

Answer 8

Tongue weight and hitch weight describe the same thing, the amount of downward force applied to the hitch. For a fifth wheel hitch, it's usually called pin weight. For example the #RP30928 has a pin weight capacity of 5,000lbs. A 3/4 or 1 ton…

view full answer...

Answer 9

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

view full answer...

Answer 10

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…

view full answer...

Answer 11

Our best swing away cargo box is the Yakima EXO System with 2 Enclosed Cargo Carriers, part #Y74ZR. This adds 20 cubic feet of storage to the rear of your RV and works with Class III and Class IV 2 inch trailer hitch receivers. This shouldn't…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Replacement Puck Light Lens

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching