Installation of a etrailer Hitch on a Jeep Cherokee Latitude

Question

Question:

Is it simple to add a tow hitch to a jeep Cherokee latitude 4x4 with a dual exhaust ?

asked by: John B

0

Expert Reply:

The recommended installation time for the etrailer Hitch item # e73ZR you were looking at is 1 hour. Now this is the time a professional installer should be able to get it done in but looking at the instructions, and specifically the part referencing the dual exhaust, I would say this is a pretty simple install. This receiver hitch bolts onto your Jeep Cherokee Latitude and will require no drilling or welding.

You will have to do the 2nd step in the installation directions twice because you have dual exhaust but other than that your exhaust system will not affect the hitch install. Without knowing your exact model year I can not make a recommendation on a wiring harness for your Jeep. Message me back with that information and I'll be glad to help you.

expert reply by: Jerred H

0

Answer 1

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 2

Looks like all versions of the 2019 Jeep Cherokee including the Latitude with single exhaust will require the dropping of both sides of the exhaust to install a hitch like the #e73ZR. You could try to get away without lowering the exhaust but I…

view full answer...

Answer 3

I recommend installing the etrailer Hitch #e73ZR on your 2020 Jeep Cherokee Latitude because it has more of a concealed look than the Curt #C13395 so it looks more like an OEM hitch. If you are planning on towing you will also need a wiring harness…

view full answer...

Answer 4

Out of the available options for your 2019 Jeep Cherokee with a dual exhaust I recommend going with the Curt Trailer Hitch Receiver #C13395. Since all of the options exceed the max weight ratings of a 2019 Cherokee it really just boils down to looks…

view full answer...

Answer 5

The hitch I recommend for your 2020 Jeep Cherokee Latitude is the mostly hidden etrailer #e73ZR. Once this hitch is installed the only thing visible will be the hitch opening hanging below the rear bumper. See attached picture. I also attached an…

view full answer...

Answer 6

The lower fascia on the back of the 2014 Jeep Cherokee curves, not straight up and down, so the reason there has to be trimming is because of how gentle that curve is and how long it curves. If the fascia went from vertical to horizontal like an L…

view full answer...

Answer 7

We have trailer hitches with concealed crosstubes that fit your 2019 Jeep Cherokee like the etrailer part #e73ZR which is a great option, but the hitch tube does hang below the rear bumper of the vehicle. We do not have a hitch like the Mopar part…

view full answer...

Answer 8

The etrailer Hitch part #e73ZR is what I recommend for a 2021 Jeep Cherokee. It offers a bolt-on fit for all models including the Latitude. It has a hidden design therefore the crosstube is tucked behind the bumper. This makes for the best ground…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Installation of a etrailer Hitch on a Jeep Cherokee Latitude

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching