How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
Question:
Hi guys, I have a spartan sport trailer boat trailer that i use for my 15foot Lund boat. Im getting ready to take the boat on vacation with the family and am looking for a complete hub and bearing assembly to have a s a spare. I just greased the bearings and spun the wheels and and checked them for any movement and they seem to spin well and sound good. I dont want to be that guy on the side of the road. Do I need to take the hub off to determine what i need? Thanks for your help
asked by: Scott C
Expert Reply:
I would be happy to help!
Unfortunately we do not have a breakdown of the specific components for your Spartan Sport Trailer, so you will need to remove one of your hub assemblies.
With the hub assembly removed you will need to look on the face of both the inner and outer bearings for the bearing number. This will be stamped in the face of the bearings as shown in the included picture of the # L44649.
If your bearing numbers are not readable you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram.
If you can provide the above information I would be happy to confirm the correct spare hub assembly for your trailer.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Search Results: 07100
- Search Results: cotter pins
- Search Results: bt8 1 " spindle
- Search Results: 1" spindle
- Search Results: 53x12 tire
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-3/4" Diameter
- Q&A: How to Determine Which Replacement Hubs Will Fit Spindle
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Let’s Check Out the Trailer Clearance or Side Marker Light w/ Reflex Reflector
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: What to Know About the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118686
- Search Results: optronics led marker lights
- Search Results: optronics trailer lights
- Video: Checking Out the Single Axle Trailer Fender w Top Step
- Video: Trailer Hub Wheel Stud Spec Review
- Q&A: Plastic Fenders for a Spartan Boat Trailer
- Q&A: Measurements Needed For Replacement Hub Assemblies Compatible With Spindle
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Recommended ST175/80D13 Trailer Tire w/ a 4 Lug Wheel
on Trailer Hubs and Drums
