What Buttons to Press and Release of Lippert Ground Control 3.0 for Zero Point Reset
Question:
If TouchPad is off which front and rear buttons do you press 5 times
asked by: Donnie E
Expert Reply:
So you are asking about the zero point calibration of the Lippert Ground Control part # LC675817 which I will list below. The front and rear buttons you have to press and release are on the wired controller like you see in the picture.
1. In manual mode, run the jacks to level the trailer. This is best
achieved by placing a level in the center of the trailer and leveling
it both front to back and then side to side. (See “Basic Jack
Operation” for instructions on how to manually operate the system).
2. Once the trailer is level, turn off the touch pad.
3. With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times.
4. The touch pad will flash and beep and the display will read “ZERO
POINT CALIBRATION ENTER to set, Power to Exit”.
5. To set the current position as the zero point, press the “ENTER”
button.
6. LCD display will read “Zero point stability check”.
7. LCD display will read “Zero point set successfully” once process is
complete.
8. The system will set this point as its level state and the touch pad
will turn off.
(click to enlarge)
Product Page this Question was Asked From
Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Controllers
- Control Module
- Lippert
more information >
Continue Researching
- Video: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System Review
- Shop: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System
- Video: Review of Lippert Replacement Ground Control 3.0 Electric Leveling System Control Module - LC304136
- Shop: Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System
- Search Results: 304136
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: How To Clear Lippert Ground Control Leveling System Error
- Search Results: trailer suspension
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Flashing Display of Lippert Ground Control and Jacks Won't Retract
- Q&A: Replacement Control Module for Lippert Ground Control System that Errors Out
- Q&A: LCI Leveling System Troubleshooting
- Q&A: Troubleshooting Error Retract Timeout on LCI RV Levelers
- Q&A: Resetting Lippert Ground Control System
- Q&A: Why Will My Lippert 3.0 Ground Control Not Receive Power on My 2018 Grand Design Fifth Wheel?
- Shop: Blind Spot Monitoring System for Towable Campers, Travel Trailers, and 5th Wheels Up to 40' Long
- Shop: Replacement Touch Screen Control Panel for Lippert Ground Control TT or Lippert OneControl - 5"
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 5K Trailer Axles
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles
- Video: Review of the Replacement Front Jack for Lippert Ground Control 3.0 Leveling System
- Search Results: trailer jack
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer hitch
- Video: Finding the Right Trailer Wiring Harness
- Video: Review of Lippert Replacement Ground Control 3.0 Lead Leg - LC305340
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
on Accessories and Parts
