Battery Replacement Process for Curt Echo Brake Controller Manual Override Button

Question

Question:

How do you change the battery in the Override Button? There are no instructions and the battery is showing at 40 in the app. Thank you

asked by: Ron C

0

Expert Reply:

In order to access the internal battery of the Curt Echo Manual Override Button # C83HR you'll want to remove the stick on the back to reveal a notch where you'll need to use a very skinny screwdriver to pry up on the unit; once you pop the back off you'll have access to the battery and can switch it out.

expert reply by: Erik B

0

Removal tab on back of Curt Echo Override button
(click to enlarge)

Answer 1

Hi Michele; if it looks the same as the picture then I'm sure it is the Liger from Lionshead. If you really want to be sure you can send me some pictures of your trailer and I'll can verify it. Our comment section doesn't allow pictures…

view full answer...

Answer 2

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 3

Hey John, good question. The app must be running in order for the separate manual override button part #C83HR to work. If your phone is not connected to the controller with the app running, the button will not do anything. I know the connectivity…

view full answer...

Answer 4

Hey Sally, are you sure the 12 volt accessory circuit of the 7-way on your 2019 Volkswagen Atlas is active? On a lot of vehicles this circuit isn't ran and you have to run wire from it to the positive post of your battery. For that 10 gauge wire…

view full answer...

Answer 5

As long as the app for the Curt Echo #C51180 is running in the background of your phone the manual override part #C83HR is going to work. It would require you killing the app for it to stop working.

view full answer...

Answer 6

Hey Martin, we can definitely help with that. Your exact tire size is only available in an off-road style but the next closest size is the ST225/75R15 which we offer with the #TR225LRE. This would be just a tiny bit smaller than what you have now but…

view full answer...

Answer 7

Nyle, it sounds like you've done your research so good on you! Unfortunately to my knowledge there are no Bluetooth brake controllers, or any brake controllers that will work with a 4-pin, all of these brake controllers are going to require a…

view full answer...

Answer 8

Hey Katja, the Curt Echo Mobile brake controller part #C51180 would be your best option. This is a wireless brake controller and all it requires is a 7-way with the taillight functions and the 12 volt accessory circuit active and you'd be set. So…

view full answer...

Answer 9

For your 2017 Subaru Outback Wagon 3.6R the SumoSprings part number #CSS-1125R is the correct fit.

view full answer...

Battery Replacement Process for Curt Echo Brake Controller Manual Override Button

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching