Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
Updated 04/14/2021 | Published 04/12/2021
Products Featured in This Question
Question:
My trailer has a 7000# rating so I presume 3500# axles. The drums are stamped with AL-KO 7230 with max diameter of 10.090. The current pads are marked with ABEX 6100 GG PRI 6512 P and ABEX 6100 GG SEC 6517 S, but that is all I can find for markings. Another post indicated these should be replaced with your part BP04-095 or BP04-100. From looks, it appears the correct part is the BP04-100 - but Im wondering if either would work for my brakes because they appear to be the same size. Do both of these contain the springs because they appear to be looking pretty nasty also? Im having all the drums turned, so they will be nice and smooth. Only one axle appears to be bad, can I just replace pads on one wheel and leave the others for later? Finally, can you let me know if you sell wheel studs for these drums? I have a few that are getting pretty hard to remove and Im afraid they will eventually break. Call if any questions...
asked by: Doug M
Expert Reply:
The Trailer Hub and Drum Assembly part # AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part # AKEBRK-35-SA. This option will save you some headache down the road although it may be a bit more expensive upfront. The cost saving would be marginal once you factor in turning the drums and getting all the correct replacement parts. It is not required to replace all braking assemblies at once but you should do an entire axle at least.
Unfortunately, we don't have a great option for cross-referencing old AL-Ko part numbers not to say the correct replacement parts are still obtainable.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: al ko 7230
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer brakes
- Search Results: bp01~301
- Search Results: l44610
- Shop: Gooseneck Hitch
- Search Results: truck tool box
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: akebrk~7
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Search Results: 90195
- Q&A: Replacement Hub/Drums & Brakes to Replace AL-KO 7230 Hubs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Video: Review of etrailer Trailer Brakes - Electric Drum Brake Kit - AKEBRK-35-SA
- Q&A: Hub & Drum With Electric Brakes Replacement For AL-KO 8700 Hub
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Andersen Camper Leveler - 4 Piece Kit with Storage Bag
- Shop: Brake Controller
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Shop: Trailer Wiring
- Video: Hands-On with the etrailer Hub Bearing Kit
- Shop: Trailer Hitch
- Q&A: Looking For Replacement For AL-KO-7230 Hub On Old Bison 2 Horse Bumper Pull Trailer
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Replacement Hub/Drum and Brake Assembly for AL-KO 7230 Hub/Drum Assembly
- Q&A: Correct Dexter Heavy-Duty Suspension Kit for a 2002 Ranger Boat Trailer With 7-3/4" Equalizer
- Shop: Cabin Air Filter
on Trailer Hubs and Drums
