Difference Between Valterra RV Sewer Spigot with Flange and Valterra RV Sewer Hub with Flange

Question

Question:

Can you tell me the difference between the Valterra RV Sewer Slip Hub with Flange - 3, Item # T1005 and the Valterra RV Sewer Spigot with Flange - 3Item # T1006?

asked by: Jim F

0

Expert Reply:

The Valterra RV Sewer Spigot with Flange part # T1006 has a spigot fitting which means it will slide into a 3" diameter sewer pipe and the Valterra RV Sewer Slip Hub with Flange part # T1005 has a hub fitting which means it will slide onto a 3" diameter sewer pipe.

expert reply by: Conner L

0

Mark

8/27/2024

Do you mean a T1006 will slide into a 3" socket i.e a 3" Coupler/Slip connector (not slide into a 3" diameter sewer pipe) and the T1005 is the socket for a 3" pipe to slide into?

Reply

Answer 1

The closest match that we have is the Valterra #T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.

view full answer...

Answer 2

It is unknown what that white material is. It is probably some kind of glue used by the manufacturer. We recommend the Valtera #A05-0303 Solvent Cement for these types of connections. Be sure to clean the joints before applying the cement.

view full answer...

Answer 3

The Valterra RV Sewer Elbow #T1035-1 is 7-1/4" tall and 5-1/2" wide. I have included an image with the measurement points below so you can see exactly where I took these measurements from.

view full answer...

Answer 4

The attached image was helpful in easily identifying exactly what measurement you wanting on the Valterra RV Sewer Elbow with Rotating Flange, #T1035-2. It is 5-5/16".

view full answer...

Answer 5

From the flange of the Valterra RV Sewer Elbow #T1035-1 out to the furthest point out on this measures 5-1/2 inches.

view full answer...

Answer 6

The only option for charging the Custer Wireless LED Tow Bar Light #LIW-LDTL-7B that you referenced is using the 12 volt cigarette lighter style connector that it comes with. We don't carry them but I found online a few places that sell AC to DC…

view full answer...

Answer 7

The transmitter for the Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23" Long - 7-Way Round Item #LIW-LDTL-7B gets it's power through the 7 Pole plug on the back of the RV. When the RV has power at the plug and the 7…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Difference Between Valterra RV Sewer Spigot with Flange and Valterra RV Sewer Hub with Flange

Product Page this Question was Asked From

Continue Researching