Valterra RV Sewer Slip Hub with Flange - 3"

Part Number: T1005

$8.52

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

valterra rv sewer hose fittings slip hubs 3 inch diameter t1005

valterra rv sewer hose fittings seals and gaskets pipe to waste valve t1005

valterra rv sewer hose fittings seals and gaskets pipe to waste valve slip hub with flange - 3 inch

valterra rv sewer hose fittings pipe to waste valve 3 inch diameter t1005

valterra rv sewer hose fittings seals and gaskets slip hubs hub with flange - 3 inch

Show All (7) Product Images

Show Fewer Product Images

Videos

Checking Out the Valterra RV Sewer Slip Hub with Flange

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

This sewer slip hub bolts onto your black-water waste valve. 3" Hub slides onto black-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately). Great Prices for the best rv sewer hose fittings from Valterra. Valterra RV Sewer Slip Hub with Flange - 3" part number T1005 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

Valterra RV Sewer Hose Fittings - T1005

This sewer slip hub bolts onto your black-water waste valve. 3" Hub slides onto black-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately).

Features:

Sewer slip hub connects your sewer pipe to your black-water waste valve
3" Hub slides onto black-water waste pipe
- Secures with ABS solvent bond (A05-0303 - sold separately)
Flange bolts onto black-water waste valve
- Hardware not included
Sturdy plastic construction

Specs:

Hub diameter: 3-1/2"
Hub depth: 1-1/2"
Mounting holes: 3-3/4" apart on center
1-Year warranty

T1005 Valterra Motorhome Sewer Slip Hub with Flange - 3"

California residents: click here

Video of Valterra RV Sewer Slip Hub with Flange - 3"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Checking Out the Valterra RV Sewer Slip Hub with Flange

Video Transcript for Checking Out the Valterra RV Sewer Slip Hub with Flange

Today we're going to take a look at the Valtera three inch RV sewer slip hub with the flange. This is made of a black hard plastic construction. Now a few measurements on this. The inside diameter on the shorter end is going to be three inches. On the flange end, inside diameter is three and a half inches. The over all length of just the flange portion is going to be right at one and a half inches.

Then the measurement on the mounting hole, center to center is going to be right at three and three quarter inches. That should do it on the Valtera three inch RV sewer slip hub with the flange.

Customer Satisfaction Score:

99% were satisfied with this product

1% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

1% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

4.8

190 reviews

5 Stars		(83)
4 Stars		(4)
3 Stars		(0)
2 Stars		(0)
1 Star		(1)

by: Chad 04/10/2024

by: Phyllis 08/02/2021

by: Gerard 05/25/2024

by: James 09/21/2022

by: William 11/06/2021

by: Amy 06/23/2023

by: Brian 12/21/2021

by: Keith 01/16/2022

by: David 10/24/2020

by: John 01/14/2023

by: Alfred 07/11/2022

by: Rodney C06/24/2024

by: Dan 04/27/2023

by: Jay 09/18/2023

by: Kieth05/28/2024

by: Peter 05/26/2023

by: Randy 01/16/2023

by: Todd06/28/2024

by: Joseph 05/30/2023

by: Al08/18/2022

by: Oscar 07/17/2024

by: Walt 06/22/2023

by: Mike 03/31/2023

by: Kevin 09/12/2020

by: Kasem10/28/2021

190

Show More Reviews

See what our Experts say about this Valterra RV Sewer Hose Fittings

Do you have a question about this RV Sewer Hose Fitting?

Does The Valterra RV Sewer Slip Hub with Flange T1005 Come With A Gasket?
Good morning, Gerard. The Valterra RV Sewer Slip Hub with Flange # T1005 does not come with a gasket. It does seem like it should, so I can't really disagree with you, but that is just how the manufacturer sells this particular part. It is purely just the replacement hub and flange. We do offer gaskets though if you need new ones: - Replacement Seals and Hardware for 3" Valterra Waste Valves Item # T1003-7VP
view full answer...
Where Is The Valterra RV Sewer Slip Hub with Flange T1005 Made
Hello Rebecca, thanks for reaching out. Valterra products like the Valterra RV Sewer Slip Hub with Flange # T1005 are made in Mexico.
view full answer...
Inner and Outer Diameter of Valterra T1005 Sewer Slip Hub
The outer diameter of the Valterra # T1005 is 3-1/2 inches and the inner diameter is 3 inch.
view full answer...
Difference Between Valterra RV Sewer Spigot with Flange and Valterra RV Sewer Hub with Flange
The Valterra RV Sewer Spigot with Flange part # T1006 has a spigot fitting which means it will slide into a 3" diameter sewer pipe and the Valterra RV Sewer Slip Hub with Flange part # T1005 has a hub fitting which means it will slide onto a 3" diameter sewer pipe.
view full answer...
3" Slip Hub For A 3" RV Waste Valve
You can do that, however the mounting holes on # T1005 are a bit too close together, and won't properly mount to the Valterra Bladex Waste Valve for RV Black Water Tank # T40. Instead, I recommend using the LaSalle Bristol RV Sewer Slip Hub with Flange # 34466V13 which has a farther apart mounting hole location. To properly secure these items together, you're also going to need some solvent # 3447530889 .
view full answer...
Compatibility of Camco RV Waste Valve With Valterra RV Hubs
Yes, the Camco RV Wastewater Tank Replacement Valve # CAM39513 will have the same bolt pattern as the Valterra RV Sewer Slip Hub # T1005 that you are connecting to. I would still recommend using a Valterra Bladex Waste Valve # T1003VP as it does not have the channels on the side and will sit flush with the mounting hubs. I don't like the grooves as they are a place that can hold water and dirt. This could lead to unwanted damage from freezing or corrosion.
view full answer...
Slip Hub for Attaching a Waste Valve to a 3" Outlet on a Gray Water Tank
Yes, using the Valterra RV Sewer Slip Hub with Flange # T1005 paired with a guillotine style waste valve like the Valterra Bladex Waste Valve Body # T1003VPM is a good option for your gray water tank. This would bond together using the Valterra ABS Solvent Cement # A05-0303.
view full answer...
Recommended Sewer and Gray Water Connections for RV Permanent Location with In-Ground Tanks
For a permanent connection if you want the wye fitting you mentioned like the Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # T81 and then the Double RV Waste Valves - Elbow - Rotating - (2) 3" Spigots to 3" Hub # T85B. The actual manual handles will give you the manual shutoff you are seeking and they can be rotated so they don't come in contact with the other handles when installed together. It is recommended to use PVC instead of hoses for as much length...
view full answer...
Can Valterra Waste Valve T58 be Upgraded so that it's Permanent Install
Yes, you could remove the twist on side of the Valterra Waste Valve part # T58 that you have now and replace it with the part # T1005 so that you could make it more permanent like you are wanting.
view full answer...
Replacement Waste Plumbing Fittings For An RV Waste System
If you have two connection points with a 3-1/2" inner diameter and just need something to slip into both of these connections then you would just need standard 3" ABS pipe, which we do not currently offer but you can get at a local hardware store. The outer diameter of the pipe would be 3-1/2" and you could slip it into the hub of the The Valterra RV Sewer Slip Hub with Flange - 3" # T1005. After slipping it over the pipe you can then attach a gate valve to the flange.
view full answer...
Can The Valterra EZ Valve Electric Waste Valve Replace the Manual Valve Already On My Camper?
Yes, the Valterra EZ Valve Electric Waste Valve # E40B-8 uses the same size 3" Slip Hub with Flange # T1005 that you have on your sewer line already. The Valve may benefit from being installed up in your enclosed underbelly with the Valterra ABS Solvent Cement # A05-0303 if you do camp when the weather is colder to help prevent the sewer pipes from freezing. It will also protect the valve from damage caused by road debris while you are driving.
view full answer...
Can the Valterra EZ Valve Electric Waste Valve # E1003VP be Installed Right Behind the Waste Cap
You definitely can use the Valterra EZ Valve Electric Waste Valve # E1003VP just before the cap to your black water tank to avoid any unpleasant presents when you take the cap off. To install it you will just need to cut the pipe and then glue the appropriate pieces together with Valterra ABS Solvent Cement # A05-0303. A great option to accomplish this is to use the Valterra RV Sewer Slip Hub with Flange # T1005 that has a 3" diameter. Just keep in mind that when the valve is open it...
view full answer...
Parts Needed to Flat Tow a 2006 Jeep Wrangler
I would be happy to help you set up your 2006 Jeep Wrangler for flat towing. You are going to need a base plate kit, tow bar, safety cables, tow bar wiring, and a supplemental braking system. If you don't already have a tow bar, I recommend the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K item # RM-676. This sleek and simple all-terrain tow bar has integrated LED lights that turn on and off with your RV's tail lights. It is rated for up to 8,000 lbs...
view full answer...

Do you have a question about this RV Sewer Hose Fitting?

Info for this part was:

Installed by:

Jeff D

Expert Research:

Jameson C

Written by:

Amy B

Updated by:

Wilson B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.