Measurement of Valterra RV Sewer Elbow with Rotating Flange

Question

Question:

I would like to know the overall length of the fitting from the sealing flange to the outside of the press fit flange. This measurement would be made perpendicular to the gate valve flange.

asked by: Ray P

1

Helpful Expert Reply:

The attached image was helpful in easily identifying exactly what measurement you wanting on the Valterra RV Sewer Elbow with Rotating Flange, # T1035-2. It is 5-5/16".

expert reply by: Michael R

1

T1035-2_003
(click to enlarge)

T1035-2_Image
(click to enlarge)

Answer 1

From the flange of the Valterra RV Sewer Elbow #T1035-1 out to the furthest point out on this measures 5-1/2 inches.

view full answer...

Answer 2

The Valterra RV Sewer Elbow #T1035-1 is 7-1/4" tall and 5-1/2" wide. I have included an image with the measurement points below so you can see exactly where I took these measurements from.

view full answer...

Answer 3

The closest match that we have is the Valterra #T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.

view full answer...

Answer 4

It is unknown what that white material is. It is probably some kind of glue used by the manufacturer. We recommend the Valtera #A05-0303 Solvent Cement for these types of connections. Be sure to clean the joints before applying the cement.

view full answer...

Answer 5

The Valterra RV Sewer Spigot with Flange part #T1006 has a spigot fitting which means it will slide into a 3" diameter sewer pipe and the Valterra RV Sewer Slip Hub with Flange part #T1005 has a hub fitting which means it will slide onto a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Measurement of Valterra RV Sewer Elbow with Rotating Flange

Featured Help Information

Miscellaneous Media

Continue Researching