Replacement Hub Needed for Dexter Axle 8-256
Question:
I need hub for my trailer detex 8-256
asked by: Rafael R
Expert Reply:
Your Dexter Axle hub 8-256 should use an # L68149 inner bearing and an # L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs:
5 on 4-1/2" - part # 84545BX
5 on 4-3/4" - part # 845475UC1
5 on 5" - part # 84550BX
5 on 5-1/2" - part # 84555UC1
Just match up the bolt pattern and you'll be good to go! I've attached some helpful articles on bolt patterns that you can check out if you aren't sure what you have.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2- Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Search Results: dexter 8 256
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Search Results: dexter hub 8 258
- Search Results: grease cap
- Search Results: 3500 lbs trailer axles
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Shop: Bearing Buddy Bearing Protectors - Model 2047SS - Stainless Steel (Pair)
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Correct Replacement for Quality 3500 Lb 95 HF 80 SC Trailer Axle
- Search Results: 8~249
- Search Results: 8~256
- Search Results: dexter axels
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: The Low-Down on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Video: Let’s Check Out the Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: Replacement Dexter 8-258 Hub Recommendation
- Q&A: D Washer for 3,500 lb Hub Assembly Item # 84545BX
- Q&A: Replacement Hub for 2014 Patriot Trailer with 3,500 Dexter Axle
- Q&A: Replacement Dexter 8-248 Hub Recommendation