How Thin Does D-Shaped Rubber Seal # 362WS1463-25 Compress Normally

Question

Question:

How thin will this compress when the door shuts? Thanks

asked by: Andy E

0

Expert Reply:

The uncompressed height of the D-Shaped Rubber Seal # 362WS1463-25 that you referenced is 3/8 of an inch. With enough pressure it could be compressed almost totally flat but in reality you'd most likely end up compressing it to about half of it's height at most for nearly all applications.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hello Ronald. You might have had a difficult time finding it on our site because it wasn't there. I reached out to Dometic and was able to get it added to our site today for purchase. For your Dometic A/C Model #3310741.xxx tells me you have the…

view full answer...

Answer 4

We have weatherstripping tape that can be used to seal your bed bunk doors withe part #WS1434 which is 3/4 inch wide that is 50 foot long or the part #WS1412 which is 1/2 inch wide and 45 inches long.

view full answer...

Answer 5

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 6

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 7

Hi Jason, We're unable to verify what seal is on any specific trailer, unfortunately, so to determine the right one for your Jayco, you'll need to know the shape and take a quick measurement. The #SR26ZR is 3/4" wide x 1/2" tall and…

view full answer...

Answer 8

Get this D-Shaped Rubber Seal #362WS1463-25 for your Haulmark 7'x14' enclosed trailer. This roll is 25 foot long and is about 1/2 inches tall which should seal up pretty good. If you think a taller seal is necessary you can get this 3/4 inch…

view full answer...

Answer 9

I went out to the warehouse and compressed both the #SR26ZR and the #SR76ZR and found that the #SR26ZR is approximately 3/8" thick when fully compressed and that the #SR76ZR compresses down to just a hair past 1/4". The base of the #SR26ZR…

view full answer...

How Thin Does D-Shaped Rubber Seal # 362WS1463-25 Compress Normally

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching