Product Experts Available Now!
Call 1-800-940-8924
Ramp Gate Seal Kit for Enclosed Trailer Ramp - Half Round Seal - 35' Long x 11/16" Tall
(23 reviews)
Price: $287.79
In Stock
Steele Rubber
Ramp Gate Seal Kit for Enclosed Trailer Ramp - Half Round Seal - 35' Long x 11/16" Tall
Part Number: SR35FR
In Stock
$287.79
Retail:$299.79
You Save: $12.00
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (23)
- Q & A (0)
- Videos (1)
- Photos
Steele Rubber Trailer Door Parts - SR35FR
- Seals
- Half Round Seals
- Stick-On
- 35 Foot Long
- 3/4 Inch Wide
- Rubber
- Steele Rubber
Protect your enclosed trailer and its contents from damage by replacing worn out weather stripping. This kit includes the tools you need to replace seals around gates for toy haulers and car trailers.
Features:
- Ramp gate seal kit weatherproofs toy and vehicle hauler gates
- 35' Half round seal with tabs keeps the elements out of your trailer when door is closed
- Ramp gate corner seal installs near door hinge for added protection
- Comes in one single piece and is trimmed for a custom fit
- Plastic scraper tool helps you get rid of any old weather stripping and adhesive before install
- Loctite super bonder 495 glue closes gaps in seal as you make trims for mitered corners
- Peel-and-stick installation with pre-applied 3M adhesive backing
- Remove backing and apply the seal to the RV frame
- Surface preparation recommended to remove any old adhesive
- Use scissors to trim extra seal
- EPDM dense rubber construction won't shrink, crack, or fade over time
- Resistant to UV damage
- Seal dimensions: 3/4" wide x 11/16" tall
- Made in the USA
90-3328-283 Steele Rubber Products Ramp Gate Kit Large Hollow Half Round with Double Tabs - 35'
Replaces 99-4446-283
Video of Ramp Gate Seal Kit for Enclosed Trailer Ramp - Half Round Seal - 35' Long x 11/16" Tall
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hands-On with the Ramp Gate Seal Kit for Enclosed Trailer Ramp
Jeff Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this ramp gate seal kit for the enclosed trailer ramps. Now this kit will protect the inside of your enclosed trailer using this hollow half round seal ramp gate kit. Helps keep water and debris from entering your enclosed trailer. And this kit will include everything I have laid out here on the table.
Starts with a 35 foot long hollow half round double tab seal with the 3M adhesive strip. The ramp gate coroner seals, a plastic scraper tool, tube of Loctite and a nice detailed instruction sheet that'll describe how to install this. Now this kit will provide this perimeter seal and the corner blocks found on many toy haulers and car trailers. And the corner blocks are basically cut out of this large block of sponge rubber. I wanna zoom in and show you the seal we're talking about, this perimeter seal.
If you look real close at the cutaway here you can see it is a double tab. You can see the two tabs at the top. This double tabbed rubber seal is highly wear and weather resistant. It is constructed of an EPDM sponge rubber. So it will not shrink, crack, or fade over time.
And it is resistant to UV and ozone exposure. You can see on the very bottom there's the 3M tape that you just peel off the backing portion and then apply it. The seal dimension, the width on it is 3/4 of an inch. And the overall height up all the way to the top of the two tabs is 11/16 of an inch. These parts are made in the USA.
But that should do it for the review on the ramp gate seal kit for the enclosed trailer ramps..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.9
23 reviews
by:
Elden
10/26/2024
Yes it's expensive! But the seal kit is the best on the market that we found!!! We converted our construction tool trailer into a camper now that we have retired and after 17 years on the job the ramp door seal needed to be replaced. This product kit had everything and the product the new seal material was better than the one installed new on this cargo trailer and we bought one of the higher-end trailers to start with. With a lot of life left in this well built trailer we decided to do this conversion and this seal kit completed the job and we are now ready for the adventures ahead.
by:
Derrick
03/09/2024
Nice tight seal around the door. Adhesive was strong.
by:
Jennie
08/08/2021
Love Love Love this replacement seal!!
by:
Robert
08/25/2022
Robert
8/26/2023
Excellent! No separation of the rubber from the trailer enclosurer what so ever.
by:
Eddie
08/20/2022
by:
Alison
02/12/2024
by:
Mr. Whiskers
10/26/2025
The seal kits has everything you need to install the seal on a Toy Hauler ramp door. The issue I encountered was that the instructions for cutting the 45 degree corner cut is impossible to create a good sealing corner. After a few tries following the instructions, I made a 45 degree miter joint jig out of wood to hold the bulb seal while cutting the 45 degree with a meat carving knife. I then glued the bulb seal 45 degree corners together using the Loctite super bonder 495 that comes with the kit to form a 90 degree corner.
Mike L.
10/28/2025
Thanks for the tips, we really appreciate it!!
by:
Joe
09/06/2021
Was thinking this project would take several hours but with the help of my son we had it all done in less than an hour. Good seal kit and easy to install. Hard to see in the one photo of my old seal but it was pretty well flattened and I'm sure not doing the job of keeping water out.
by:
Fred
12/13/2021
Just got it very fast shipping to cold to put on yet
Fred
12/14/2022
Great
by:
William
05/27/2025
seals great. Could've used a couple extra feet. I'll find something to make it good. Thanks
by:
Amos
05/20/2022
Seal was a great fit and we had a driving rain yesterday and not one drop of water got through. I am very pleased with the quality of the seal and the fast delivery. Very good value for the price.
Amos
5/23/2023
After a year still a perfect fit and no leaks.
by:
Randall
08/23/2022
This kit is perfect for a toyhauler ramp.
by:
Jim
08/06/2024
It was pretty easy to install. The custom trim-to-fit has worked really well.
by:
Ken
01/29/2023
quality product. Seems expensive for what it is, but should last.
by:
David
06/09/2021
Samantha stayed on the phone till we found the right part excellent service
by:
Jeffrey
08/25/2026
by:
Dan
08/27/2026
by:
Matthew
01/22/2023
Very thick
by:
Richard
09/26/2024
by:
J T
08/14/2022
by:
Steven
02/10/2025
by:
Ronald
01/13/2023
by:
Steve
10/24/2024
23
23
true
See what our Experts say about this Steele Rubber Trailer Door Parts
- Where Should Replacement Ramp Door Seal Be Installed On TrailerThe Ramp Gate Seal Kit for Enclosed Trailer Ramp # SR35FR can be installed in either location. Personally, I would keep it off the ramp door since you're more likely to damage it as you walk or move things across the ramp. Inside the frame enclosure would be the way to go.
view full answer...
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Cody B
Edited by:
Amanda M
Written by:
Halie H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Elden
10/26/2025
After a year and about 5K miles on our Utility trailer that we converted to a camper that seal we installed on the ramp door is really a game changer!!! No dust no air leaks.... Money well spent on a great product!!!