Torque Specs for Wet Bolts for Dexter Axle E-Z Flex Suspension Kits

Question

Question:

I have a 2018 Cedar Creek with the 8000lb axel and the dexter ezfelx suspension on it. I have noticed that the front and rear shackle bolts are working loose. What is the torque spec for these bolts?

asked by: Robert B

0

Expert Reply:

According to the installation instructions from Dexter Axle the torque specs for the wet bolts on their Dexter E-Z Flex Suspension Kits, like part # K71-653-00, is 30 - 50 ft-lbs. I have attached a clip from their instructions for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

There is no specific torque rating for shackle bolts. You'll want to ensure that the bolts you use are long enough so that when installed you will have at least 2 threads protruding from the nut. Make sure that the bolt you're using has a…

view full answer...

Answer 2

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

view full answer...

Answer 3

Hello Brian; the 3/8" difference isn't enough to matter so you can use the #e89FV as a replacement. We do have the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb Round Trailer Axles #APUBR-8 for 3" diameter axles. This has 7" long…

view full answer...

Answer 4

Hey Jason, so we know that your 2020 Grand Design Solitude 390RK does have 8k axles so in terms of capacity the leaf spring part #e89FV that you referenced would work but we don't have a way to verify the length of your current springs so you…

view full answer...

Answer 5

Based on your measurements, the MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase #MR34AR will be a perfect fit for your trailer. Since you have 2-1/4" shackles I also highly recommend adding the…

view full answer...

Answer 6

For all of our springs we list the unloaded length measured center eye to center eye straight across. Leaf springs can extend up to 1" when flexed. If you are looking to replace old leaf springs, you will want to jack up the trailer so that the…

view full answer...

Answer 7

The inner tube of the Bulldog Gooseneck Coupler #BD0289800300 would fit your 4 inch square outer coupler jack coupler tube. The amount of bolts would not be an issue.

view full answer...

Answer 8

I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and inner tube of the standard…

view full answer...

Answer 9

I spoke with the manufacturer and they recommend using 160 ft-lb for the torque spec on a 3/4 inch U-bolt #11-70.

view full answer...

Answer 10

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 11

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

view full answer...

Answer 12

Hi Bobby; I have attached a help article below which explains how to replace trailer leaf springs in 5 steps. I also attached an installation video. Between the two you should be able to install the #DX55CR without any issues. Edit: I just double…

view full answer...

Torque Specs for Wet Bolts for Dexter Axle E-Z Flex Suspension Kits

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching