Recommendation for Replacing Bevel Gears for Atwood Landing Gear or Replacing Entire Landing Gear

Products Featured in This Question

Landing Gear Set - 36-1/2" Lift - 8,000 lbs

(674)

$355.63

Replacement Switch for Stromberg Carlson Electric Landing Gear

(60)

$76.08

Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

(53)

$28.03

Question:

I have 1995 Shadow Cruiser 5th wheel. GVWR 7000 26.5 feet I have broken teeth on the bevel gears in the Atwood landing Gear. The leg near the manual crank is broken, Other side OK. Identifying number on lower end of leg.... 3054 See Bulletin 71125 or 70802 For Capacity and Operation Atwood Rockford IL Looking for a bevel gear replacement kit each gear 15T or An economical replacement for the entire landing gear assembly What can you recommend?

asked by: Don R

Expert Reply:

Since Atwood is no longer in the landing gear making business and you have an older 5th wheel trailer I recommend just replacing your entire landing gear set. This not only gives you peace of mind that everything is in good shape but it also makes tracking down replacement/repair parts in the future much easier.

For your application I recommend the Landing Gear Set # RVLG-8000 which has up to a 36-1/2" lift and is rated for 8,000 lbs. This cost-effective option comes with the landing gear and the gear box so all you need is the manual hand crank # RVLG-HDL to operate it. You also have the option to upgrade to an electric operation with the motor # M1230 and switch # LG-145236 in the future.

To verify fitment with your 1995 Shadow Cruiser you just need to make sure that the weld stops on your current landing gear measure 15-1/2" inside or 17-1/2" outside like you see in the attached photo.

expert reply by: Jon G