How to Use the Draw-Tite 16K Slider 5th Wheel Hitch with the Ford Factory Prep Package

Question

Question:

I have a draw tite 16 k slider hitch that I want to adapt to my 2019 Ford F-250 with the factory installed under mount fifth wheel . It this the part I want to order since I will not be installing rails in the bed . I like the idea of the removable adaptor to give me full access of my truck bed when not in use . Thank you for your assistance.

asked by: David

1

Helpful Expert Reply:

Yes, the Reese Elite Series Under Bed Rail Adapter part # RP30156 that you referenced is exactly what you will need to use the Draw-Tite 16K Slider 5th Wheel Hitch 6033 on your 2019 Ford F-250 with the factory prep package. As you referenced, this adapter is removable so you will still have full bed access while not in use.

expert reply by: Conner L

1

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 11

Hi Bob; is your Patriot the slider #BWRVK3270 you looked at or the fixed #BWRVK3255? I know you said fixed mount hitch but since you looked at the slider I want to be sure. If it is the fixed hitch you can use the Adapter Rails for Curt 5th Wheel…

view full answer...

Answer 12

Hey Tom, if you're not entirely married to the B&W the Pullrite SuperGlide 5th Wheel Hitch for Ford Super Duty Factory Prep Package #PUL73RR is just as good and can get to you before the end of the month. This hitch also has a 20k capacity,…

view full answer...

How to Use the Draw-Tite 16K Slider 5th Wheel Hitch with the Ford Factory Prep Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching