Can Brophy Camper Scissor Steps # AS04 be Installed on Ram 150 Tailgate

Question

Question:

Could the AS04 be used from the tailgate of my Ram 1500 by just resting the bracket that extends from the stair or would it collapse? My tail gate is about 37 off the ground. A clamp or bracket could possibly secure it to the inside face of the gate. Thanks. Note: I have a Kodiak canvas tent that I mount to my pickup bed and I need a way to get in.

asked by: Robert S

0

Expert Reply:

The Brophy Camper Scissor Steps # AS04 actually come with a bracket for you to mount on your pickup. It allows you to easily install the steps when you reach your destination and then remove them before heading out! If you would like to add a handrail for more stability we also have part # AHR4 for you to use.

expert reply by: Jon G

0

click to enlarge

Answer 1

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 2

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 3

The Brophy Scissor Steps #SS04 that you referenced have a universal-type design so they will fit a wide variety of different applications. If the bottom of the door on your Expedition motor home measures between 31 inches and 40 inches above the…

view full answer...

Answer 4

The TorkLift GlowStep Revolution Scissor Steps #TLA8006 are designed to replace the fold out style steps most commonly found on 5th wheel type trailers. For your BigFoot truck camper you would want a system like the TorkLift GlowStep Stow N' Go…

view full answer...

Answer 5

Sounds like you'd want to go with a removable scissor setup like the Brophy Camper Steps part #AS24 which will need to be taken off it's mounting bracket between uses. This will give you total access to your trailer hitch when needed.

view full answer...

Answer 6

The bracket of the Aluminum Scissor Steps #AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling. Check out the review video I attached for these steps as well.

view full answer...

Answer 7

The actual weight of the Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs #AS24 is 28 pounds.

view full answer...

Can Brophy Camper Scissor Steps # AS04 be Installed on Ram 150 Tailgate

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching