Do the Aluminum Scissor Steps # AS04 Get Removed While Traveling

Question

Question:

When traveling does the aluminum scissor steps stay attached or do you remove them and store them when traveling?

asked by: Janet

0

Expert Reply:

The bracket of the Aluminum Scissor Steps # AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling.

Check out the review video I attached for these steps as well.

expert reply by: Jameson C

0

Answer 1

The weight of the #AS04 steps is 21 lbs, and these have a weight capacity of 250 lbs. The weight of the #SS04 steps is 37 lbs, and these have a weight capacity of 300 lbs. For safety purposes, I also recommend using some Non-Slip Adhesive Safety…

view full answer...

Answer 2

Sounds like you'd want to go with a removable scissor setup like the Brophy Camper Steps part #AS24 which will need to be taken off it's mounting bracket between uses. This will give you total access to your trailer hitch when needed.

view full answer...

Answer 3

The actual weight of the Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs #AS24 is 28 pounds.

view full answer...

Answer 4

Oh no! I hope your Granddaughter is okay! The best option we have for what you're describing is the SafeStep Vinyl Barrier #TLA7602. This system uses vinyl barriers secured to the steps with hook and loop style fasteners (basically Velcro) though…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 10

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 11

Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…

view full answer...

Answer 12

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Do the Aluminum Scissor Steps # AS04 Get Removed While Traveling

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching