Solution for Transporting Native Titan 10.5 Kayak

Question

Question:

Hello, I am wondering if you can reccomend a rooftop solution to mount a Native Titan 10.5 fishing kayak 121 pounds with out accessories in the top of a 2015 4Runner with factory roof racks. I have looked at some of the solutions from Yakima, but it looks like they are rated at 80 pounds. I would prefer not to use a trailer. Thanks for your help!

asked by: PT

0

Expert Reply:

I know you said you don't want a trailer option, but realistically a trailer option might be your only option like the part # CE48810. None of the roof kayak carriers have enough capacity for the 121 lbs of your kayak and even if they did it would be rather difficult to lift that heavy of a kayak on your roof.

expert reply by: Jameson C

0

Answer 1

Yes the Yakima BigCatch Kayak Carrier w/ Tie-Downs part #Y04091 will work on your Yakima Rack and Roll Trailer. To prevent them from moving they are easy to tighten down and get really secure. With that said there is the potential for them to rotate…

view full answer...

Answer 2

In order to secure a kayak to the Yakima Rack and Roll Trailer part #Y08107 you'll need some sort of carrier to help hold it in place, I recommend the Lockrack Adjustable XL Watersport Carrier part #LR54FR since it has locks for security and a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Daniel, The Yakima Rack And Roll 78", #Y08107, is a great option for hauling your 2 kayaks. I went ahead and looked up the dry weight of your kayaks and they came out to around 221lbs for the both of them. I recommend you go with the…

view full answer...

Answer 5

We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned has been discontinued by the manufacturer and is no longer available. Instead, which I highly recommend is an option…

view full answer...

Answer 6

According to my contact at CE Smith their Trailer for Boats and PWCs #CE48810 can indeed take 12-inch wheels, with only new fenders required as you noted. I have linked our main page for tire/wheel combinations in the 12-inch size and with the…

view full answer...

Answer 7

The CE Smith Boat Trailer #CE48810 that you referenced is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph.

view full answer...

Answer 8

The CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870 uses #L44649 bearings. The correct Bearing Buddy Bearing Protectors are the #BB1980A-SS. These fit a 1.98" hub bore and L44649 outer bearings. They also have a stainless steel…

view full answer...

Answer 9

Since your Stryker LX 360 inflatable boat is 11'7" long x 5'6" wide it will fit on the CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs #CE48810 you were looking at and have the…

view full answer...

Answer 10

We have the CE Smith boat trailer part #CE48810 which is designed for small boats like your 12.5 foot Flycraft inflatable boat. I attached a picture that shows a similar boat loaded on this trailer as well.

view full answer...

Answer 11

Yes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. To complete the conversion you will…

view full answer...

Solution for Transporting Native Titan 10.5 Kayak

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching