Installing the Draw-Tite Max-Frame Trailer Hitch Receiver on your 2021 Subaru Outback Wagon Video

Both the Curt Trailer Hitch Receiver #C67JR and the Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR are perfectly compatible with the rear bumper under guard you are describing. These are two very different hitches. The #DT73RR installs by bolting…

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy…

The distance from the hitch pin hole to the edge of the bumper on the #DT73RR will be approximately 6" so I don't think that 1Up rack would work. They don't list measurements but the shank on the bike rack doesn't look very long at…

I have some great trailer hitch options for a 2021 Subaru Outback Wagon, the Curt Trailer Hitch Receiver part #C67JR and the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR. The Curt Hitch looks better installed as it has a hidden cross tube…

When looking at the Draw-Tite Hitch #DT73RR and the #e25TR, there are some differences to consider. The first thing is the weight capacity. The #DT73RR offers 675 pounds of tongue weight/4,500 pounds of gross towing weight while the #e25TRonly offers…

Both the Curt item #C67JR and the etrailer item #e25TR are confirmed to fit the 2023 Subaru Outback. These hitches are identical with the exception that the etrailer hitch has a matte black powder coat finish that offers superior rust protection.…

Yes, you can definitely use the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT74YR to tow a trailer with your 2024 Subaru Outback Wagon. As long as you stay within the 350 lb tongue and 3,500 lb towing weight ratings (or lower than your vehicle…

As long as your 2019 Subaru Outback Wagon has the factory side rails running front to back, then you can install longer Yakima crossbars. The 78" crossbars may be too wide since you do not want to exceed the total width of your vehicle (due to…

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

The only measurement I would need is the overall width of the slide-out including the flanges or trim around the perimeter of the slide-out. So if that measurement were 72 inches overall then you would use a 6-1/2 foot option such as #LCV000165063.…

Swagman once made the bike racks for Reese, including your Outfitter rack. You can use the Replacement Top Plate for Swagman Original Series 4 Bike Carriers #P113. This includes the plate and knobs. This may differ slightly from the original part but…

Swagman once manufactured bike racks for Reese and Hidden Hitch. The Outfitter model was one of those bike racks. If you have the 3 bike version, then you will use the Replacement Top Plate for Hidden Hitch Bike Rack #SP-102 if you have 5 inch…