How to Determine Required Trailer Axle Weight Capacity and Dimensions
Products Featured in This Question
Question:
I am currently building a 5.5foot 66 wide trailer by 12foot long. I am having trouble trying to figure out how wide of a axle I am going to need/want for this set up.
asked by: Roger
Expert Reply:
Axle dimensions are fairly standardized. Those we sell are offered in 4 lengths, 57-1/2-inch, 60-inch, 72-inch and 89-inch. We also have axles-less trailer suspensions from Timbren that bolt on to the trailer frame and eliminate the leaf spring suspension completely which can provide excellent ground clearance when that is an important factor.
You can see all of our axles on the linked page. For a 66-inch wide trailer you will probably want to use a 72-inch beam axle like # 20545I-EZ-72-10 or one of the Timbren kits such as # A35RS545.
You need to take note of the spacing of the leaf spring seats too. These seats are placed on the axle beam at varying distances depending on the axle size. An 89-inch beam axle typically has spring centers placed at 74-inches but it is possible to weld on new spring seats like # TRSS175 in different positions.
The most important consideration for selecting an axle is weight capacity. The axle(s) on the trailer must be rated to carry the combined total weight of the trailer itself plus the intended cargo.

Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 5000 lbs axle
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Shop: 6-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Q&A: Determining the Carrying Capacity of Trailer
- Q&A: Recommended 4,400 Pound Leaf Springs and Hanger Kit for Home Built Trailer
- Q&A: How to Determine How Long of a Trailer Axle is Needed When Building Trailer
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Q&A: How to Determine the Correct Axle Position When Building a Trailer
- Search Results: trailer leaf springs
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Trailer Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: trailer suspension parts
- Q&A: Replacement Leaf Spring for 7k Axle that is 25-1/4 inch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: leaf spring
- Shop: Suspension Enhancement
- Video: Review of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Article: Double-Eye Trailer Suspension System Review
- Search Results: equalizer
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Gooseneck Hitch
- Video: The Low-Down on the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles