Replacement Hubs for BD-545-17 Drum Brakes and Braking Assemblies
Updated 03/16/2018 | Published 03/15/2018
Products Featured in This Question
Question:
I NEED TO REPLACE DRUMS AND BACKING PLATES ON A CAMPER. THEY ARE 10 INCH 5 LUG, WITH BD-545-17 ON THE DRUM. WHAT DRUMS CAN I USE? ALSO, CAN I USE DEXTER BACKING PLATE SETS?
asked by: DANA D
Expert Reply:
The exact replacement hub assemblies you need are the AxleTek Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K. These assemblies come with the bearings, races, seal, grease cap and even the lug nuts needed. You can absolutely use the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 with these hubs and they will work great. If you don't want the Dexter name brand, you can use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA made by the same company as your hubs. Both options are self adjusting so you will not need to manually adjust your assemblies as they wear for best braking as they will automatically do so.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer jack
- Search Results: tongue jack
- Search Results: axletek
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 5 on 4-1/2
- Shop: etrailer Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: etrailer Tow Bar Cover for Blue Ox, Roadmaster, Demco, Curt, and etrailer Tow Bars
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: rubber grommet
- Search Results: hub assembly
- Search Results: trailer brakes
- Q&A: Replacement Options For A Dometic RV Air Conditioner Model # 57915.541
- Search Results: curt 15800
- Q&A: Removing Trailer Bearing that is Stuck on Spindle After Removing Hub
- Q&A: Can you Determine The Correct Replacement Key For a Master Lock Coupler Lock Without Having The Key?
- Q&A: Replacement Key For Master Lock Coupler Lock
- Q&A: How to Get a Replacement Key for a Master Lock 389DAT Trailer Coupler Lock
- Shop: Trailer Hitch
- Shop: Base Plate for Tow Bar
- Q&A: Replacement Grease Seal for Axletek Hub BD-545
- Q&A: How to Adjust Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Trailer Wiring
- Video: Beginner’s Guide to Installing the Timbren Rear Suspension Enhancement System on a 2005 GMC Sierra
- Video: Feature Review Trailer Hub and Drum Assembly
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Shop: Roof Rack