LED Tail Light Replacements for Jayco Eagle Pop-Up Camper

Question

Question:

What LED lights would you recommend to replace the OEM yellow clearance lights mounted along the sides of my 2000 Jayco Eagle M-12 UDK popup camper?

asked by: Timothy P

0

Expert Reply:

We do carry a large selection of LED tail lights and we will undoubtedly have ones that will work for your 2000 Jayco Eagle M-12 UDK pop-up camper, though we do not have a parts list available for specific trailers.

The best way for you to find new LED lights would be to measure your current lights and find a close match. For example, tail lights # TLL12RK are 7-9/16" long x 2-3/4" tall x 3/4" deep and recess mounted, while # TLL9RK are 5-1/16" long x 4-9/16" tall x 2-5/8" deep and surface mounted.

I've added a link to our selection of LED tail lights for you so you can find the ones that work for you.

expert reply by: Kyle S

0

Timothy

3/16/2018

What LED lights would you recommend to replace the OEM yellow clearance lights mounted along the sides of my 2000 Jayco Eagle M-12 UDK popup camper?

Reply

Kyle S.

3/16/2018

Like with your tail lights you will be able to find a replacement for your clearance lights on the sides of your 2000 Jayco Eagle by measuring your current lights and finding a match. I have added a link to our entire selection of yellow LED clearance lights for you to check out.

Reply

Answer 1

Hello Jim, thanks for reaching out. We do offer lift kits that can be used with the Dexter Torsion axles. Do you happen to know the weight capacity of the axle? The S/N seems to indicate a 3,500 lb axle but please do confirm. We offer lift kits for…

view full answer...

Answer 2

For your Jayco Eagle 12 UDK trailer, we only have the Timbren Axle-Less Suspension systems as replacements for your torsion axles whether they are the Dexter Torflex or not. These simply mount to your frame and use a 2 inch square tube (not included)…

view full answer...

Answer 3

From what I can see in the photo it looks like you have a Dexter Torflex torsion axle, the #10 Torflex axle with a 2,500 lb capacity. Based on that the correct lift kit is the Torflex Lift Kit #K71-707-01. However, it is important to make sure your…

view full answer...

Answer 4

I was able to identify your axle thanks to the tag you sent in and Dexter's help and found that the lift kit you'd need would be the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01.

view full answer...

Answer 5

The best way to lift your Jayco Eagle is called an over/under conversion kit, which moves your trailer's leaf springs to the top of your axle and lifts your trailer approximately the same amount as your axle's diameter plus the height of the…

view full answer...

Answer 6

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Answer 7

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

view full answer...

Answer 8

Hey Mike! Sounds like you're needing the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-545-2-EZ-2K. If you're wanting something with a better protective coating the Galvanized Hub #AKIHUB-545-2-G-EZ-2K will do the trick, but…

view full answer...

Answer 9

Hello Carolyn, On the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs #CG, from the center of the ball to the farthest corner of the little red handle is 6-3/4 inches, so the recessed box needs to be 14 inches square and…

view full answer...

Answer 10

Thanks for the picture. I went ahead and checked out what we have that matches that style of plug, and unfortunately we do not have anything that matches what you are needing. The closest 3-prong wire we have is the 3-Wire Pigtail for Trailer Tail…

view full answer...

Answer 11

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 12

The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 uses the Shackle Bolt #007-126-01. The 9/16" portion of this bolt is 2-1/4" long.

view full answer...

LED Tail Light Replacements for Jayco Eagle Pop-Up Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching