Dexter 7,000 lb Axle Hub and Brake Assembly Recommendation

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(248)

$174.28

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(248)

$174.28

etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K

(2743)

$197.22

Question:

This my axle from dexter, could send me part numbers for brakes auto adjust, bearing and race kit and seal

asked by: David B

Expert Reply:

Does the spindle look damaged at all? Sometimes bearings can be a pretty tight fit to the spindle but there should be enough clearance to allow the bearing to slip on without needing too much effort.

For Dexter 7k axles the bearing surfaces should measure 1.74 and 1.25. You'd want to make sure your spindle matches those diameters. Chances are the spindle may have gotten deformed from overheating and now it's not perfectly round.

expert reply by: Jameson C

David B.

11/17/2017

This my axle from dexter, could send me part numbers for brakes auto adjust, bearing and race kit and seal

Jameson C.

11/17/2017

For a Dexter 7,000 lb axle the correct hub you'd need is the part # 42866UC3-EZ which comes with included bearings, seal and races. Then for self adjusting brake assemblies you'd want the part # AKEBRK-7-SA which comes with both sides.