Castle Nut Torque Spec for 7,000 Pound Trailer Axle
Updated 05/03/2022 | Published 05/02/2022
Question:
what is the nut torque on a 7000 lb axle after packing the bearings?
asked by: Jerry H
Expert Reply:
There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle.
I have attached a video showing this process. If you jump to the 4:45 minute mark, you can see the procedure outlined above.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 7K Axles - 12" - 8 on 6-1/2
- Shop: Gooseneck Hitch
- Search Results: wheel bearing grease
- Search Results: 1/2 lug nuts
- Search Results: trailer hubs and drums
- Search Results: 7000 lbs axle trailer bearings races seals caps
- Search Results: kodiak 250
- Search Results: lippert trailer hubs and drums
- Search Results: lug nuts
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 5.2K - 7K Axles - 12-15/16" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: DeeMaxx Disc Brake Assembly - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coating - 7,000 lbs
- Shop: Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs - E-Z Lube
- Shop: Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Raw/E-Coat - 7,000 lbs - E-Z Lube
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Video: All You Need to Know About the LumenX LED Trailer Tail Light
- Q&A: Electric Trailer Jack For Sundowner 3 Horse Trailer
- Shop: Brake Controller
- Q&A: Troubleshooting Error Codes SH and OL on a Tekonsha Prodigy Brake Controller
- Shop: Suspension Enhancement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Replacement Trailer Brake Magnet for 12" Brake Assemblies Review
- Q&A: Torque for 7,000 lb, 12 Inch x 2 Inch Dexter Electric Brakes
- Q&A: What is the Torque Spec of the Spindle Nut on a Dexter E-Z Lube Axle
- Video: Hands-On with the Replacement Magnet for Dexter 12-1/4" x 5" Electric Brake Assemblies
- Shop: Performance Chip Tuners
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Comprehensive Review: Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies
on Trailer Hubs and Drums
