Compatibility of A-Frame Tool Box with Spare Tire Carrier on 20 Foot Big Tex Tilt Trailer  

The Curt Threaded Quick Link, 1/2" #C82932 have the 16,500 lbs break strength and 3,300 lbs working load limit but are not available in stainless steel. They are zinc coated to prevent corrosion. The Quick Link I recommend is the Blue Ox…

Your safety chains should have a maximum gross trailer weight rating, which is what you would need to go by to ensure they are properly rated for your 10,000 lb GVWR trailer. If they are then you can attach them to your Ford hitch; wrapping them…

The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

A standard 50 degree coupler like #DM14793-81 will work on your custom 45 degree frame with a little modification. Without welding shims the coupler will not have the strength, so you will need to make some adjustments to your current tongue design.…

I walked out to our warehouse and pulled the Redline A-Frame Trailer Coupler #CA5100B. At the widest point inside the coupler measured approximately 9-1/4 inches, the narrowest approximately 2 inches and 8 inches between those points. Check out the…

Demco says to use 1/2" Grade 8 bolts 1-1/2" long for the safety chains on the Demco 50-Degree A-Frame Trailer Coupler #DM16680-52. I recommend the Buyers Products 3/8" x 35" Class 4 Trailer Safety Chain #337BSC3835. You will need…

A trailer tire size of ST185/80R13 would be a great solution for your trailer that has passenger tires/wheels on it currently. The Loadstar #AM3S334 would be a great option as long as you have a bolt pattern of 5 on 4-1/2 inch. It'll have more…

Trailer tires do not need to be balanced like passenger tires on a vehicle do. Our tire and wheel combos are balanced by mounting the high heavy spot on the tire so that it is aligned with the low light spot on the wheel. They can be balanced at a…

We have the A-frame tool box part #UWS01039 which would be tall enough for a propane tank that is 19 inches tall but the #313-TM362016M would be just a little bit too short for that. I attached a review video for more info on this for you to check…

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

We carry both double-eye leaf springs and slipper-type leaf springs and the linked page displays the double-eye springs we have for 3500-lb axles. These range in length, measured from eye to eye, from 23-1/8-inches to 27-inches long. For example,…