Determining Correct Length Replacement Leaf Spring

Question

Question:

when I measure the old spring 25.5 and I see the one you all have is 25 1/4 what should I due. Also my trailer sets very close to the trailer tire can I increac the height I have the right tire size

asked by: Bryan

0

Expert Reply:

Trailer leaf springs can grow longer after many years of use. A new springs that measures 25-1/4-inches long like # e57SR could easily measure 25-1/2-inches after years in service on a trailer. Springs can lengthen as much as 3/4 of an inch. If your old spring measured 25-1/2 you can safely conclude that it is actually a 25-1/4-inch.

Our main leaf spring page is linked for you. Just click on your dimension and axle weight rating to see suitable options.

Generally you want no less than 3-inches of space between the tire's top tread surface and the trailer frame. Odds are that your new springs (always replace all springs at the same time) will lift the trailer slightly thanks to them being stiffer than the old ones.

expert reply by: Adam R

0

Matthew

3/13/2024

I am rebuilding a heavy utility trailer. The trailer was home build. Rust has taking hard at its springs and I would like to replace them. The springs are eye to eye with a length of 41 inches. They are a 1 an 3/4 wide with 8 leafs. I have not been able to find anything online even close.. The trailer is double wheeled with a single axle and walking beams. 5 X 10. Any help would be appreciated. Thanks

Jon G.

3/13/2024

@Matthew There aren't any standard leaf springs that match your 41" eye-to-eye measurement so you're looking at either cutting off and welding new hangers for a shorter set of leaf springs, or going with an alternative suspension type altogether. If you let me know the weight rating of your trailer axles I can make some alternative recommendations for you.

Matthew

3/13/2024

@JonG Thanks for you quick response. Like I said trailer is home built heavy duty. The main axle is 2 1/8 stainless steel. I would guess they harvested the springs from a car or small truck. I have no problem welding new springs on. The trailer pulls up to 2 tons. I will need springs and new hangers, pins etc. If you could give me a recommendation on something close. Thanks again

Jon G.

3/14/2024

@Matthew It's a pretty common thing to take vehicle parts and use them for homemade trailers so you aren't alone. To replace your hangers and leaf springs I recommend the following kits: - Single-Axle Trailer Hanger Kit # APS4 (which will give you 5" or 5-1/2" clearance between trailer frame and axle) - 25-1/4" Long 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles # e44SR Since you said the trailer pulls up to 2 tons I went with the 5K spring just to make sure we cover the weight of the trailer as well as your loads. For this setup you'll have the hangers spaced out 24-7/8" on center with the bolt holes for the leaf spring.

Helpful Links

tv-review-etrailer-trailer-leaf-spring-suspension-e47sr.aspx

Answer 1

Hey Eric, if you were wanting a scissor jack style of leveling jack the part #JSC-24 would be a great set. Is the type of jack you were wanting or were you thinking something more like a stabilizer jack like the Trailer Valet #TV68FR.

view full answer...

Answer 2

Hello Mike, Thank you so much for the detailed information, most helpful! For the leaf springs, you will want to go with (6) of the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR. Since you have 7K axles, these are the…

view full answer...

Answer 3

Hey Ben, so yes you can and for that rated spring in the same length you'd want the part #DX23CR.

view full answer...

Answer 4

To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located…

view full answer...

Answer 5

Hi Troy; the #DX23CR is 25-1/4" long and the #e54SR is 25-1/8" long. That is really the main difference. The capacity is the same and both are 4-leaf double eye springs. Neither of them are made in the USA. However, I can't tell which…

view full answer...

Answer 6

Thanks so much for that info, and to replace your current leaf springs that are 24 inches apart from center eye to center eye, you want springs that are slightly shorter because over time they flatten out. So for replacements I recommend 23-1/8"…

view full answer...

Answer 7

Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…

view full answer...

Answer 8

Hey John, You definitely weren't lying about those springs being flattened out. With them being flattened out they are going to be a bit wider so you will need a shorter eye-to-eye measurement than 26-1/4". My only concern is that the #e54SR…

view full answer...

Answer 9

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

view full answer...

Answer 10

If your existing leaf springs measure 25-1/2" then the correct replacement is likely either 25-1/8" or 25-1/4" as leaf springs stretch over time. Please note, leaf springs should also be measured with the trailer unloaded. I have…

view full answer...

Answer 11

If you are wanting to go to higher capacity leaf springs I would advise against it. The problem is that since the trailer axle is rated for 3,500 pounds you won't gain any additional capacity by switching to higher capacity springs. What it will…

view full answer...

Answer 12

The correct replacement equalizer for your 13-104 is TruRyde Curved Equalizer #TREQ104. If you need the kit, you can use the Redline Tandem-Axle Trailer Equalizer Kit #AP233. The upgrade we offer for the 13-104 equalizer is the Dexter E-Z Flex Heavy…

view full answer...